This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Structural Integrity Analysis of the Charging Air Tube Support for a Diesel Engine of Commercial Vehicle
Technical Paper
2012-36-0457
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The study is carried out through numerical and experimental methods. The finite element method is used to simulate the support mechanical behavior via modal analysis, and for the evaluation of stress concentration regions through pressure and thermoelastic static analyses, and dynamic analysis. The fatigue life is calculated for the presented stresses.
Stress, acceleration and temperature data were obtained through dynamic test. For material evaluation, chemical analysis, hardness and metallographic analysis were carried out. For thoroughness, a failed support fractography will be presented.
The objective of this study is to correlate the data obtained by numerical method with experimental data, and as a result, the support failure mechanism was identified. A modified support is presented to avoid the failure for the determined loads.
The support within the proposed modifications reduces the current maximum stress in 41% and improved the fatigue life in 4.99e5 cycles.
Authors
Citation
Negretti, T., Kitagawa, H., Couto, A., Miletovic, C. et al., "Structural Integrity Analysis of the Charging Air Tube Support for a Diesel Engine of Commercial Vehicle," SAE Technical Paper 2012-36-0457, 2012, https://doi.org/10.4271/2012-36-0457.Also In
References
- European Standard, DIN EN 10149-3 1.0971 1995
- Marin, J. Mechanical Behavior of Engineering Materials Prentice-Hall Englewood Cliffs, N.J. 1962 224
- Tork, Controle Tecnológico de Materiais Ltda. Material Test Report num.:12015029MCSP 2012
- Callister, William D. Jr. Materials Science and Engineering Seventh John Wiley & Sons 2007
- Campbell, W. The Protection of Steam Turbine Disk Wheels from Axial Vibration Trans. ASME 1924
- Negretti, T. Structural Analysis Report N1004-465: P2 Charging Air Tube and Supports T-Systems do Brasil 2011
- European Standard, DIN EN 10149-2 1.8974 1995
- Shigley's Mechanical Engineering Design Eighth McGraw'Hill Primis 2008