This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
New Concept on Drills Up To 5/8″ (16mm) for One Shot IT8 Robot Application
Technical Paper
2012-01-1865
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Industrial robot applications are going to reduce cost in capital investment and enhancing the capability. A new concept of drill technology is successfully running in composite trailing edge manufacturing for drilling 5/8\mi holes in Composite/Aluminum stacks in IT8 quality. This article characterizes the special features of drilling of CFRP/Titanium and Aluminum stacks. Simplified theoretic models will show how CFRP/Titanium stacks should be machined without scratches and burn marks contacting carbon. Low axial forces and smart chip removal technology are the main characteristics of the drilling tool technology, optimized to reach IT8 quality in one shot operation.
Recommended Content
Citation
Mueller-Hummel, P. and Meiners, C., "New Concept on Drills Up To 5/8″ (16mm) for One Shot IT8 Robot Application," SAE Technical Paper 2012-01-1865, 2012, https://doi.org/10.4271/2012-01-1865.Also In
References
- HINTZE, W. Wirtschaftliche Zerspanung von Leichtbaustrukturen durch den Einsatz innovativer Hartmetallschneidstoffe und Diamantbeschichtungen Laser Focus März 1982 49 54
- STÖVER, E. Untersuchungen zum Bohren des Faser-Metall-Laminates Glare sowie von Glare-Schichtverbunden Dissertationsmanuskript TU Hamburg-Harburg Institut für Pro¬duktionsmanagement und -technik Hamburg 2006
- FANGMANN, S. ET AL. Orbitalbohren geschlossener Strukturteile erfordert optimierte Werkzeuge, Maschinenmarkt 06 07 2007
- WACHINGER, G. THUM, C. SCHEID, P. CFRP Repair Methods Hannover, Neue Fertigungstech¬nologien in der Luft- und Raumfahrt IFW 19 20 11 2008
- RICHTER, J. MÜLLER-HUMMEL, P. Bearbeitung von CFRP-Bauteilen im Flugzeugbau Schmalkalden, Schmalkalder Werkzeugtagung 2008
- MATTHEWS, F. L. DAVIES, G. A. O. HITCHINGS, D. SOUTIS, C. Finite Element Modelling of Composite Materials Woodhead Publishing Limited Cambridge, England 2000
- DORNFELD, D. AVILA, M. ARDNER, J. REICH-WEISER, C. VIJAYARAGHAVAN, A. Strategies for Burr Minimization and leanability in Aerospace and Atomotive Manufacturing Consortium on Deburring and Edge Finishing, eScholarship Repository University of California Berkeley http://repositories.cdlib.org/lma/codef/avila 06 1 2006
- MIN, S. DORNFELD, D. KIM, J. SHYU, B. Finite Element Modeling of Burr Formation in Metal Cutting Proc. 4th CIRP Int'l Workshop on Modelling of Machining Operations Delft August 2001
- MÜLLER-HUMMEL, P. RICHTER, J. MÖLLER, B. Neue Werkstoffe fordern neue Allianzen; Werkstatt und Betrieb Carl Hanser Verlag München WB 10 2008
- VIJAYARAGHAVAN, A. DORNFELD, D. Challenges in Modelling Machining of Multilayer Materials Proc. Of 8th CIRP Int'l Workshop on Modelling of Machining Operations” 17 24 2005
- MÜLLER-HUMMEL, P. LAHRES, M. Infrared Temperature Measurement on Diamond-Coated Tools during Machining Bachmann, P. K. Bruckley-Golder, I.M. Glass, I. T. Kamo, M. Proc. of 4th. European Conference on Diamond, Diamond-like and Related Materials Albufeira, Portugal Elsevier Sequoia S.A., Lausanne 765 1993
- MÜLLER-HUMMEL, P. LAHRES, M. A New Instrument to optimize cutting Processes: In Situ Temperature Measurement on Diamond - coated Tools Innovations in Material Research World Scientific Publishing 1996 1 1 1 9 1996
- Meiners, C. “Robotic Drilling Solution for Hole Diameter up to 5/8″ (16mm) in Multi Material Stacks,” Oral Only Presentation at SAE 2011 AeroTech Congress & Exhibition October 2011