This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Virtual Exhaust-Gas Aftertreatment Test Bench - A Contribution to Model-Based Development and Calibration of Engine Control Algorithmsa
Technical Paper
2012-01-0897
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Introducing new exhaust-gas aftertreatment concepts at mass production level places exacting demands on the overall development process - from defining process engineering to developing and calibrating appropriate control-unit algorithms. Strategies for operating and controlling exhaust-gas aftertreatment components, such as oxidation and selective catalytic reduction catalysts (DOC and SCR), diesel particulate filters (DPF) and SCR on DPF systems (SCR/DPF), have a major influence on meeting statutory exhaust-emission standards. Therefore it is not only necessary to consider the physical behavior of individual components in the powertrain but also the way in which they interact as the basis for ensuring efficient operation of the overall system.
The following considerations aim to develop and calibrate simulation methods for exhaust-gas aftertreatment systems using IAV ANBsim with a focus on analyzing strategies for operating and controlling exhaust-gas aftertreatment systems on the basis of production control-unit algorithms implemented in a Rapid Prototyping environment. This approach enables the evaluation of operating and control strategies early on in the development process, supporting algorithm development.
For this purpose, real-time numerical models are generated for simulating the physical and chemical processes taking place in exhaust-gas catalytic converters or diesel particulate filters and integrated as system models in a HiL simulator (“hardware in the loop”) with control unit and production algorithm. This virtual test bench provides the capability of automatically simulating driving cycles, such as FTP75 and NEDC, while taking into account different calibrations. It also permits the analysis of the operating and control strategy impact on the tailpipe emissions. The effects of new algorithms can be studied directly.
By way of example, capabilities of the virtual test bench are discussed on the basis of an ammonia-metering strategy used by SCR catalyst and SCR/DPF systems. Analysis covers differently calibrated control parameters, providing a route to necessary extensions of the control-unit algorithms.
Recommended Content
Authors
Topic
Citation
Langeheinecke, K., Schrade, F., Dusemund, S., Berner, T. et al., "Virtual Exhaust-Gas Aftertreatment Test Bench - A Contribution to Model-Based Development and Calibration of Engine Control Algorithmsa," SAE Technical Paper 2012-01-0897, 2012, https://doi.org/10.4271/2012-01-0897.Also In
References
- Welty, J.R. Wicks, C.E. Wilson, R.E. Rorrer, G.L. “Fundamentals of Momentum, Heat, and Mass Transfer” John Wiley & Sons, Inc. 2008 978-0470128688
- Hayer, R.E. Kolaczkowski, S.T. “Introduction to Catalytic Combustion” Overseas Publishers Association Amsterdam 1997 90-5699-092-6
- Lowell, S. Shield, J.E. Thomas, M.A. Thommes, M. “Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density,” Kluwer Academic Publishers Dordrecht 1-4020-2302-2 2004
- Koebel, M. Elsener, M. Kleemann, M. “Urea-SCR: A promising Technique to reduce NOx Emissions from Automotive Diesel Engines” Catalysis Today 59 335 345 2000
- Sjovall, H. Blint, R.J. Gopinath, A. Olsson, L. “A Kinetic Model for the Selective Catalytic Reduction of NOx with NH3 over an Fe-zeolite Catalyst” Ind. Eng. Chem. Res. 49 39 52 2010
- Press, W.H. Teukolsky, S.A. Vetterling, W.T. Flannery, B.P. “Numerical Recipes: The Art of Scientific Computing” Cambridge University Press 978-0-521-88068-8 2007
- Dusemund, S. Schneider, H. Langeheinecke, K-J. Bank, R. “KATsim - Ein Werkzeug zur numerischen Simulation von Abgaskatalysatoren” MTZ 70 2009
- Lee, J. Paratore, M. Brown, D. “Evaluation of Cu-Based SCR/DPF Technology for Diesel Exhaust Emission Control,” SAE Int. J. Fuels Lubr. 1 1 96 101 2009 10.4271/2008-01-0072
- Schrade, F. Brammer, M. Schaeffner, J. Langeheinecke, K. et al. “Physico-chemical Modelling of an Integrated SCR on DPF (SCR/DPF) System for Diesel Passenger Car Applications,” SAE Technical Paper 2012-01-1083 2012