This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study of Piston Pin Noise of Semi-Floating System
Technical Paper
2012-01-0889
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper summarizes the piston pin noise mechanism and show the way to reduce noise level of semi-floating system. A mechanism of piston pin noise of semi-floating system was clarified by measurement of piston and piston pin behavior and visualization of engine oil mist around piston and piston pin. Piston and piston pin behavior was measured by accelerometer and eddy current type gap sensor with linkage system at the actual engine running condition. Engine oil behavior was visualized and measured its flow vector by Particle Tracking Velocimetry (PTV). For PTV, engine oil mist particle image was taken by high speed camera with fiber scope attached to linkage system. From themeasurement, it was cleared that engine oil doesn't reach to piston hole from undersurface of piston land and come rushing out from piston broach via groove. The result shows that lacking of engine oil between piston and piston pin makes noise larger. This is the key point of clarification of piston pin noise mechanism and countermeasure for piston. Finally, semi-floating piston pin noise level was reached to almost same as full-floating system by application of oil flow control shape for piston.
Recommended Content
Citation
Kondo, T. and Ohbayashi, H., "Study of Piston Pin Noise of Semi-Floating System," SAE Technical Paper 2012-01-0889, 2012, https://doi.org/10.4271/2012-01-0889.Also In
References
- Kawano, K. Sue, S. Ishida, H. Mechanism analysis of piston pin/pin boss bearing impact noise JSAE Proceedings 148-08 5 10 2008
- Takiguchi, M. Aoki, Y. Anzai, S. Relation between Lubricating Condition and Pin Slap Vibration at Pin Boss Bearing JSAE Proceedings 50-02 5 8 2002
- Kamiya, M. Kobayashi, T. Take, K. Takahashi, Y. Mihara, Y. Someya, T. Measurement of Piston Skirt Oil-film Pressure when Piston Slap Noise Occurs Honda R&D Technical Review 19 1 149 155
- Usui, M. Murayama, K. Sato, K. Yoshida, H. Research in Lubricating Oil Flow and Visual Observation around Piston Ring JSAE Proceeding 7-06 5 8 2006
- http://www.nissan-global.com/JP/NEWS/2008/_STORY/081110-03-j.html
- Nishikawa, C. “Optimization of Semi-Floating Piston Pin Boss Formed by Using Oil-Film Simulations,” SAE Technical Paper 2012-01-0908 2012
- Koske, N. Yoshihiro, O. Sound Quality Evaluation Technique of Vehicle in Consideration of Auditory Characteristic Honda R&D Technical Review 9 131 139 1997
- Shi, Fanghui Overview of Analytical Methods for Lubricated Engine Components Paper no. IJTC2007-44365 1065
- Takashi, K. Hisayuki, O. Visualization of Oil Behavior when Piston Pin Noise Occurs Honda R&D Technical Review 23 2 72 78
- Takashi, K. Hisayuki, O. Mechanism Analysis of Piston Pin Noise by Visualization of Oil Behavior JSAE Proceeding 153-11 25 28 2011