This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Enabling Exponential Growth of Automotive Network Devices while Reducing the Wired Communication Infrastructure with Security, Reliability, and Safety
Technical Paper
2012-01-0736
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The CAN protocol has served the automotive and related industries well for over twenty-five (25) years now; with the original CAN protocol officially released in 1986 followed by the release of CAN 2.0 in 1991. Since then many variants and improvements in CAN combined with the proliferation of automotive onboard microprocessor based sensors and controllers have resulted in CAN establishing itself as the dominant network architecture for automotive onboard communication in layers one (1) and two (2). Going forward however, the almost exponential growth of automotive onboard computing and the associated devices necessary for supporting said growth will unfortunately necessitate an equivalent growth in the already crowded wired physical infrastructure unless a suitable wireless alternative can be provided.
While a wireless implementation of CAN has been produced1, it has never obtained real traction within the automotive world. Other alternative methodologies for providing wireless connectivity have been much more pervasive and accepted, but none of them provide anything more to CAN interfaces than a CAN-to-Wireless Bridge; with Wi-Fi, Blue Tooth, and GSM being the primary wireless network architectures bridging to CAN.
What is proposed within this paper is more than simply a wireless extension of CAN in that it does more than extend CAN into the wireless domain (as was the case with CANRF). As pure wireless CAN with no accommodations for heavy utilization would only exacerbate CAN's primary deficiency of starving out lower priority messages; since there would be no way to isolate devices in sub-networks as could be done with a wired infrastructure.
Rather, the proposal within this paper would attack this deficiency head-on by modifying the newly defined wireless network protocol and architecture, DQWA (Distributed Queuing Wireless Arbiter) to not only extend CAN into the wireless domain, but also addresses CAN's more prominent shortcomings.
DQWA is a solution that provides both security and reliability within a wireless framework, while maintaining CAN's distributed network communication methodology and implicit avoidance of single points of failure within the network.
Recommended Content
Authors
Citation
Shields, B., Campbell, G., and Gael, J., "Enabling Exponential Growth of Automotive Network Devices while Reducing the Wired Communication Infrastructure with Security, Reliability, and Safety," SAE Technical Paper 2012-01-0736, 2012, https://doi.org/10.4271/2012-01-0736.Also In
References
- Xu, Wenxin Campbell, Graham 1992 A Near Perfect Stable Random Access Protocol for a Broadcast Channel In Proc. of the IEEE International Conference on Communications 1992 (ICC'92) 370 374 1
- Campbell, Graham Xu, Wenxin 2001 Patent No. 6292493 USA
- Wu, C. T. Campbell, G. “CBR Channels on a DQRAP-based HFC Network” SPIE ‘95 (PhotonicsEast) Philadelphia, PA Oct. 1995
- Littleson, Randy Senior VP Marketing, Flexera Software “Anyone for 1 quadrillion intelligent, connected devices on the Internet?” July 2011 http://blogs.flexerasoftware.com/ecm/2011/07/anyone-for-1-quadrillion-intelligent-connect-devices-on-the-internet.html
- Alonso-Zárate, J. Verikoukis, C. Kartsakli, E. Cateura, A. Alonso, L. 2008 A near-optimum cross-layered distributed queuing protocol for wireless LAN [medium access control protocols for wireless LANs] Wireless Communications, IEEE 15 1 48 55