This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Potential Failure Modes and Accelerating Test Strategy of Burner
Technical Paper
2012-01-0523
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Driven by diesel engine emission regulation, more emission aftertretment products have been under development by Tenneco to address the Particular Matter (PM) and NOx reduction needs. The T.R.U.E. (Thermal Regeneration Unit for Exhaust) Clean active thermal management system is one of the examples to reduce PM. The system is designed to increase exhaust temperatures for DPF (Diesel Particulate Filter) regeneration. This product is exposed to high temperature and high oxidation. Therefore, thermal fatigue, creep, oxidation and the interaction become critical mechanism to be considered for its durability. One of the key challenges to validate this product is to find a way of accelerated testing for thermal, creep, and oxidation as well as for vibration.
In this paper, accelerated durability test strategy for high temperature device like T.R.U.E Clean is addressed. High temperature induced oxidation, creep, and larger deformation become dominant factors of device durability, which includes nonlinear physical mechanisms and mathematical models. To validate the product, potential failure modes have to be understood. An accelerated test strategy is also necessary to validate the design within development cycle to satisfy customer and market's requirements. Thus, modeling for potential failure modes such as fatigue, creep, oxidation, and their combination are introduced. Accelerated test strategy is proposed based on potential failure mode analyses. The design guidelines are also provided to reduce potential failures.
Recommended Content
Authors
Topic
Citation
Cheng, H., Yang, F., and Wei, Z., "Potential Failure Modes and Accelerating Test Strategy of Burner," SAE Technical Paper 2012-01-0523, 2012, https://doi.org/10.4271/2012-01-0523.Also In
References
- Walsh, M. “Global Trends in Diesel Emissions Regulation - A 2001 Update,” SAE Technical Paper 2001-01-0183 2001 10.4271/2001-01-0183
- Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration (NHTSA) “Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles” August 9 2011
- Federal Register 73 96 May 16 2008 Rules and Regulations
- Kotrba, Adam Yetkin, Argun Lacin, Figen Spinks, Tom VanDyne, Ed Paterson, Clark Stover, Kevin Woolston, Mark Westinbrink, Frans “A Smart Burner System for Aftertreatment Activation and Control” Global Powertrain Conference Novi, MI September 19 21 2006
- Liebowitz, Barry Hansen, Tim A. “Nyserda Clean Diesel Technology: Non-Road Field Demonstration Program Interim Report” February 2007
- Lemaitre, J. A course on damage mechanics Springer 2 nd 1996
- Wei, Zhigang Yang, Fulun Cheng, Henry Nikbin, Kamran Probabilistic Prediction of Crack Growth Based on Creep/Fatigue Damage Accumulation Mechanism Journal of ASTM International 8 5
- Sugiura, R. Yokobori, A.T. Tabuchi, M. Characterization of structural embrittlement of creep crack growth for W-added 12% Cr ferritic heat-resistant steel related to the multiaxial stress Journal of Engineering Materials and Technology 2009 131 011004-1 011004-9
- Laird, C. Smith, G.C. Crack propagation in high stress fatigue Philosophical Magazine 1962 8 847 57
- Saxena, A. Nonlinear Fracture Mechanics for Engineers CRC Press LLC 1998
- Guidelines for performing probabilistic analyses of boiler pressure parts Final report December 2000 1000311 EPRI
- Sehitoglu, H. Thermomechanical fatigue life prediction methods Mitchell, M.R. Landgraf, R.W. Fatigue lifetime predictive techniques, ASTM STP 1122 Philadelphia Springer 1992
- Wei, Zhigang Yang, Fulun Cheng, Henry Oxidation Assisted Fatigue Crack Growth Model and Its Probabilistic Analysis 17th ISSAT International Conference on Reliability & Quality in Design August 4 6 2011 Vancouver, B.C., Canada