This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Discussion on Fault Detection, Isolation, Identification and Reconfiguration in Networked Control Systems of Aerospace Vehicles
Technical Paper
2011-36-0088
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this work, the problem of fault detection, isolation, and reconfiguration (FDIR) for Networked-Control Systems (NCS) of aerospace vehicles is discussed.
The concept of fault-tolerance is introduced from a generic structure, and a review on quantitative and qualitative methods (state estimation, parameter estimation, parity space, statistic testing, neural networks, etc.) for FDIR is then performed.
Afterwards, the use of networks as loop-closing elements is introduced, followed by a discussion on advantages (flexibility, energy demand, etc.) and challenges (networks effects on performance, closed-loop fault-effects on safety, etc.) represented thereby.
Finally, examples of applications on aerospace vehicles illustrate the importance of the discussion herein exposed.
Authors
Citation
Siqueira, J. and de Oliveira e Souza, M., "A Discussion on Fault Detection, Isolation, Identification and Reconfiguration in Networked Control Systems of Aerospace Vehicles," SAE Technical Paper 2011-36-0088, 2011, https://doi.org/10.4271/2011-36-0088.Also In
References
- ARP 4754 “ Certification considerations for highly-integrated or complex aircraft systems ” http://standards.sae.org/arp4754a/ 11 04 2011
- Astrom, K. J. Wittenmark, B. “ Adaptive Control ” Prentice Hall 2nd 1994
- Avizienis, A. Laprie, J. C. Randall, B. “ Fundamental Concepts of Dependability ” http://www.cs.rutgers.edu/∼rmartin/teaching/spring03/cs553/presentations/avizienis00.pdf 12 05 2011
- Blanke, M. “ Fault-tolerant control: an engineering approach ” Department of Control Engineering, Aalborg Uni. Denmark September 1996 www.control.auc.dk/∼05gr834/Fault%20detection/FDIcourse.pdf 11 04 2011
- Boegh, S. A. Blanke, M. “ Fault-tolerant control - a case study of the Oersted Satellite ” IEEE Colloquium in Process Systems Fault Diagnosis 11/1 11/13 April 1997
- Berbra, C. Lesecq, S. Gentil, S. Thiriet, J. M. “ Co-Design of a safe network controlled quadrotor ” Proceedings of the 17th World Congress, The International Federation of Automatic Control 5506 5511 Seoul, Korea July 6 11 2008
- Chandrasekharan, P. C. “ Robust Control of Linear Dynamical Systems ” Academic Press 1996
- DeCastro, J. Tang, L. Byington, C. S. Culley, D. E. “ Analysis of decentralization and fault-tolerance concepts for distributed engine control ” 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit Denver, Colorado Aug. 2 5 2009
- Diallo, D. Benbouzid, M. H. Makouf, A. “ A fault-tolerant control architecture for induction motor drives in automotive applications ” IEEE Transactions on Vehicular Technology 53 06 November 2004
- Eterno, J. S. Looze, D. P. Weiss, J. L. Willsky, A. S. “ Design issues for fault-tolerant restructurable aircraft control ” Proc. 24th CDC; Fort Lauderdale 900 905 1985
- Gertler, J. J. “ Survey of model-based failure detection and isolation in complex plants ” IEEE Con. Sys. Mag. 8 6 03 11 December 1988
- Gupta, R. A. Chow, M. Y. “ Networked Control System: Overview and Research Trends ” IEEE Transactions on Industrial Electronics 57 7 2527 2535 November 2009
- Hokayem, P. F. Abdallah, C. T. “ Inherent issues in networked control systems: a survey ” Proceedings of the 2004 American Control Conference Boston, MA Jun. 30 th Jul. 02 nd 2004
- Lindsay, P. A. “ Improved acquisition processes for safety-critical systems ” The Australian Department of Defence Software Verification Research Centre, The University of Queensland Queensland 4072 http://espace.library.uq.edu.au/view/UQ:95714 11 04 2011
- Maxwell, J. C. “ On governors ” Proceedings of the Royal Society, No.100 1868 http://seit.unsw.adfa.edu.au/staff/sites/hrp/historicalpapers/ongovernors.pdf 11 04 2011
- Montestruque, L. A. Antsaklis, P. “ Stability of model-based networked control systems with time-varying transmission times ” IEEE Trans. Autom. Control 49 1562 1572 2004
- Patton, R. J. “ Fault-tolerant control: The 1997 situation ” Proceedings of the 3rd IFAC symposium on fault detection, supervision and safety for technical processes 1033 1055 August 1997
- Rodrigues, M. Theillol, D. Aberkane, S. Sauter “ Fault tolerant control design for polytopic LPV systems ” Int. J. Appl. Math. Comput. Sci. 17 1 27 37 2007
- Stengel, R. F. “ Intelligent failure-tolerant control ” IEEE Con. Sys. Mag. 14 23 1991
- Yang, T. C. “ Networked control system: a brief survey ” IEEE Proc. Control Theory Appl. 153 4 July 2006
- Yue, D. Han, Q.L. Peng, C. “ State feedback controller design of networked control systems ” IEEE Trans. Circuits Syst. 51 640 644 2004
- Zhang, Y. Jiang, J. “ Bibliographical review on reconfigurable fault-tolerant control systems ” Annual Reviews in Control 32 229 252 2008
- Zhang, L. Shi, Y. Chen, T. Huang, B. “ A new method for stabilization of networked control systems with random delays ” IEEE Trans. Autom. Control 50 1177 1181 2005
- Zhang, Y. Suresh, V. S. Jiang, B. Theilliol, D. “ Reconfigurable control allocation against aircraft control effector failures ” 16th IEEE International Conference on Control Applications 1197 1202 Singapore 1 3 October 2007