This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Overview of Diesel Engine Applications for Engine System Design - Part 2: General Performance Characteristics
Technical Paper
2011-01-2179
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diesel engine performance and design characteristics are affected by applications. Understanding general performance characteristics and the relationship between engine system design and applications is important for diesel engine system design engineers. This paper is the Part 2 of a series of three companion papers (parts) addressing diesel engine applications (i.e., Part 1 - organization design and systems engineering; Part 2 - general performance characteristics; and Part 3 - operating and design characteristics of different applications). It illustrates important general characteristics with selected examples, and highlights key issues and commonalities of different applications that engine system design engineers need to know. Series design and multi-purpose design are summarized. Four core equations in an engine air system theory are proposed in order to reveal the parametric dependency of pumping-loss-related parameters. An interactive and coupled design methodology of engine-drivetrain system is developed. A formula of calculating the isentropic engine retarding power of compression-release brakes is proposed. Valvetrain dynamics and valvetrain system design are summarized. The interactions between valvetrain and turbocharger in engine air system design are revealed. A low-pumping-loss WE- VVA (wastegating elimination intake variable valve actuation) system is discovered by using simulation analysis with air system capability charts. A fundamental engine trade-off between peak cylinder pressure and exhaust manifold gas temperature is discovered. Selected references are provided in the review portion.
Recommended Content
Authors
Topic
Citation
Xin, Q., "Overview of Diesel Engine Applications for Engine System Design - Part 2: General Performance Characteristics," SAE Technical Paper 2011-01-2179, 2011, https://doi.org/10.4271/2011-01-2179.Also In
References
- Challen, B. Baranescu, R. “Diesel Engine Reference Book, 2nd edition,” SAE International Warrendale, PA 978-0-75062-176-2 1999
- Mollenhauer, K Tschoeke, H 2010 Handbook of Diesel Engines Johnson, K G E Springer-Verlag Berlin Heidelberg
- Xin, Q. “Overview of Diesel Engine Applications for Engine System Design - Part 1: Systems Engineering and Rational Considerations of Product R&D Organization Design,” SAE Technical Paper 2011-01-2181 2011
- Xin, Q. “Overview of Diesel Engine Applications for Engine System Design - Part 3: Operating and Design Characteristics of Different Applications,” SAE Technical Paper 2011-01-2180 2011
- Xin, Q 2011 Diesel Engine System Design Woodhead Publishing Cambridge, UK
- Xin, Q 2010 ‘Heavy-duty diesel engine system design’ Zhao, H Advanced Direct Injection Combustion Engine Technologies and Development, Volume 2: Diesel Engines Woodhead Publishing Limited Cambridge, UK 376 539
- ISO Standard 1204 1990 ‘Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine’
- ISO Standard 2710 ‘Reciprocating internal combustion engines - Vocabulary’
- ISO Standard 7967-1 2005 ‘Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers’
- ISO Standard 21006 2006 ‘Internal combustion engines - Engine weight (mass) declaration’
- SAE International Surface Vehicle Recommended Practice “Engine Terminology and Nomenclature - General,” SAE Standard J604 June 1995
- Lloyd, A C Cackette, T A 2001 ‘Diesel engines: environmental impact and control’ Journal of the Air and Waste Management Association 51 6 809 847
- Cadle, S H Ayala, A Black, K N Graze, R R Koupal, J Minassian, F Murray, H B Natarajan, M Tennant, C J Lawson, D R 2008 ‘Real- world vehicle emissions: a summary of the seventeenth coordinating research council on-road vehicle emissions workshop’ Journal of the Air and Waste Management Association 58 1 3 11
- Sawyer, R F Harley, R A Cadle, S H Norbeck, J M Slott, R Bravo, H A 2000 ‘Mobile sources critical review: 1998 NARSTO assessment’ Atmospheric Environment 34 12-14 2161 2181
- Franz, N 2002 ‘EPA releases toxics risk assessment’ Chemical Week 164 24 34
- Leister, M E 2004 ‘Clean diesel future impacts’ Hart World Fuels Conference San Antonio, TX March 23 25
- Larson, J M Jenkins, L F Narasimhan, S L Belmore, J E 1987 ‘Engine valves - design and material evolution’ Transactions of the ASME, Journal of Engineering for Gas Turbines and Power 109 355 361
- Wang, Y S Narasimhan, S Larson, J M Schaefer, S K 1998 ‘Wear and wear mechanism simulation of heavy-duty engine intake valve and seat inserts’ Journal of Materials Engineering and Performance 7 1 53 65
- Mc Geehan, J. Wells, J. Kennedy, S. Huang, A. et al. “API CI-4: The First Oil Category for Diesel Engines Using Cooled Exhaust Gas Recirculation,” SAE Technical Paper 2002-01-1673 2002 10.4271/2002-01-1673
- Mc Geehan, J. Moritz, J. Shank, G. Kennedy, S. et al. “API CJ-4: Diesel Oil Category for Both Legacy Engines and Low Emission Engines Using Diesel Particulate Filters,” SAE Technical Paper 2006-01-3439 2006 10.4271/2006-01-3439
- Mc Geehan, J. Moritz, J. Shank, G. Kennedy, S. et al. “API CJ-4: Diesel Oil Category for Pre-2007 Engines and New Low Emission Engines Using Cooled Exhaust Gas Recirculation and Diesel Particulate Filters,” SAE Technical Paper 2007-01-1966 2007 10.4271/2007-01-1966
- Mc Geehan, J. “Diesel Engines Have a Future and That Future is Clean,” SAE Technical Paper 2004-01-1956 2004 10.4271/2004-01-1956
- Zhuang, W Z Swansson, N S 1998 ‘Thermo-mechanical fatigue life prediction: a critical review’ DSTO Aeronautical and Maritime Research Laboratory report, DSTO-TR-0609 Australia
- Rie, K-T Portella, P D 1998 Low Cycle Fatigue and Elasto-Plastic Behavior of Materials Elsevier Oxford
- Nicholas, T 2006 High Cycle Fatigue: A Mechanics of Materials Perspective Elsevier Oxford
- Chien, W Y Pan, J Close, D Ho, S 2005 ‘Fatigue analysis of crankshaft sections under bending with consideration of residual stresses’ International Journal of Fatigue 27 1 19
- Ilia, E. Chernenkoff, R. “Impact of Decarburization on the Fatigue Life of Powder Metal Forged Connecting Rods,” SAE Technical Paper 2001-01-0403 2001 10.4271/2001-01-0403
- Nishiyama, T. Murakami, O. Katsurai, T. Adachi, K. “Cylinder Head Gasket for High Combustion Pressure Diesel Engines,” SAE Int. J. Engines 2 1 941 947 2009 10.4271/2009-01-0993
- Sato, K. Nishiyama, T. Murakami, O. Kunieda, K. et al. “Strength Analysis of a Cylinder Head Gasket Using Computer Simulation,” SAE Int. J. Mater. Manuf. 2 1 92 98 2009 10.4271/2009-01-0197
- Roy, R 1990 A Primer on the Taguchi Method Van Nostrand Reinhold New York
- Yan, J. Rogalla, R. Kramer, T. “Diesel Combustion and Transient Emissions Optimization Using Taguchi Methods,” SAE Technical Paper 930600 1993 10.4271/930600
- Fowlkes, W Y Creveling, C M 1995 Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development Addison-Wesley Publishing Company Reading, MA
- Eriksson, L Johansson, E Kettaneh-Wold, N Wikstrom, C Wold, S 1999 Design of Experiments: Principles and Applications Umetrics, AB Sweden
- Tanner, F. Srinivasan, S. “Optimization of Fuel Injection Configurations for the Reduction of Emissions and Fuel Consumption in a Diesel Engine Using a Conjugate Gradient Method,” SAE Technical Paper 2005-01-1244 2005 10.4271/2005-01-1244
- Srinivasan, S. Tanner, F. Macek, J. Polacek, M. “Computational Optimization of Split Injections and EGR in a Diesel Engine Using an Adaptive Gradient-Based Algorithm,” SAE Technical Paper 2006-01-0059 2006 10.4271/2006-01-0059
- Srinivasan, S. Macek, J. Polacek, M. Tanner, F. “Computational Optimization of a Split Injection System with EGR and Boost Pressure/Compression Ratio Variations in a Diesel Engine,” SAE Technical Paper 2007-01-0168 2007 10.4271/2007-01-0168
- Zottin, W. Cuco, A. dos Reis, M. da Silva, R. “Application of Optimization Techniques in the Design of Engine Components,” SAE Technical Paper 2008-01-0219 2008 10.4271/2008-01-0219
- Pierik, R. Burkhard, J. “Design and Development of a Mechanical Variable Valve Actuation System,” SAE Technical Paper 2000-01-1221 2000 10.4271/2000-01-1221
- Shelby, M. Stein, R. Warren, C. “A New Analysis Method for Accurate Accounting of IC Engine Pumping Work and Indicated Work,” SAE Technical Paper 2004-01-1262 2004 10.4271/2004-01-1262
- Pulkrabek, W W 2003 Engineering Fundamentals of the Internal Combustion Engine Second Prentice Hall Upper Saddle River, NJ
- Stone, R 1999 Introduction to Internal Combustion Engines 3rd SAE International Warrendale, PA
- Heywood, J B 1988 Internal Combustion Engine Fundamentals McGraw-Hill New York
- ISO Standard 1585 1992 ‘Road vehicles - Engine test code - Net power’
- ISO Standard 2534 1998 ‘Road vehicles - Engine test code - Gross power’
- ISO Standard 3046 ‘Reciprocating internal combustion engines - Performance’
- ISO Standard 5165 1998 ‘Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method’
- ISO Standard 8178 ‘Reciprocating internal combustion engines - Exhaust emission measurement’
- ISO/TR Standard 9310 1987 ‘Road vehicles - Smoke measurement of compression-ignition (diesel) engines - Survey of short in-service tests’
- ISO Standard 10054 1998 ‘Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smoke meter’
- ISO Standard 11614 1999 ‘Reciprocating internal combustion compression-ignition engines - Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas’
- ISO Standard 14396 2002 ‘Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178’
- ISO Standard 15550 2002 ‘Internal combustion engines - Determination and method for the measurement of engine power - General requirements’
- ISO Standard 16183 2002 ‘Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions’
- ISO Standard 16185 2000 ‘Road vehicles - Engine families for certification of heavy-duty vehicles by exhaust emission’
- Gillespie, T.D. “Fundamentals of Vehicle Dynamics,” SAE International Warrendale, PA 978-1-56091-199-9 1992
- Lechner, G Naunheimer, H 1999 Automotive Transmissions: Fundamentals, Selection, Design and Application Fahrzeuggetriebe Day, M Springer-Verlag Berlin Heidelberg, New York
- Garrett, T K Newton, K Steeds, W 2001 The Motor Vehicle thirteenth Butterworth-Heinemann Oxford, UK
- Xu, W-D 2000 Powertrain Matching of Diesel Engines China Machine Press
- ISO Standard 10521-1 2006 ‘Road vehicles - Road load -Part 1: Determination under reference atmospheric conditions’
- ISO Standard 10521-2 2006 ‘Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer’
- ISO Standard 23274 2007 ‘Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles’
- SAE International Surface Vehicle Recommended Practice “Joint TMC/SAE Fuel Consumption Test Procedure - Type II,” SAE Standard J1321 Oct. 1986
- Israel, M. Hu, H. “Impact of Ambient Parameters on Operating Efficiency of Compression Release Engine Retarder Systems on Heavy Duty Diesel Engines,” SAE Technical Paper 932972 1993 10.4271/932972
- Walsh, M. “Global Trends in Diesel Emissions Control - A 1997 Update,” SAE Technical Paper 970179 1997 10.4271/970179
- Walsh, M. “Global Trends In Diesel Emissions Control - A 1998 Update,” SAE Technical Paper 980186 1998 10.4271/980186
- Majewski, W.A. Khair, M.K. “Diesel Emissions and Their Control,” SAE International Warrendale, PA 978-0-76800-674-2 2006
- Song, C 2003 ‘An overview of new approaches to deep desulfurization for ultra-clean gasoline, diesel fuel and jet fuel’ Catalysis Today 86 1-4 211 263
- DeFries, T. Kishan, S. Smith, M. Anthony, J. et al. “The Texas Diesel Fuels Project, Part 1: Development of TxDOT-Specific Test Cycles with Emphasis on a “Route” Technique for Comparing Fuel/Water Emulsions and Conventional Diesel Fuels,” SAE Technical Paper 2004-01-0090 2004 10.4271/2004-01-0090
- Matthews, R. Hall, M. Anthony, J. Ullman, T. et al. “The Texas Diesel Fuels Project, Part 2: Comparisons of Fuel Consumption and Emissions for a Fuel/Water Emulsion and Conventional Diesel Fuels,” SAE Technical Paper 2004-01-0087 2004 10.4271/2004-01-0087
- Mallamo, F. Badami, M. Millo, F. “Analysis of Multiple Injection Strategies for the Reduction of Emissions, Noise and BSFC of a DI CR Small Displacement Non-Road Diesel Engine,” SAE Technical Paper 2002-01-2672 2002 10.4271/2002-01-2672
- Mallamo, F. Badami, M. Millo, F. “Effect of Compression Ratio and Injection Pressure on Emissions and Fuel Consumption of a Small Displacement Common Rail Diesel Engine,” SAE Technical Paper 2005-01-0379 2005 10.4271/2005-01-0379
- Klingbeil, A. Juneja, H. Ra, Y. Reitz, R. “Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2003-01-0341 2003 10.4271/2003-01-0341
- Niemi, S. Paanu, T. Laurén, M. “Effect of Injection Timing, EGR and EGR Cooling on the Exhaust Particle Number and Size Distribution of an Off-Road Diesel Engine,” SAE Technical Paper 2004-01-1988 2004 10.4271/2004-01-1988
- Niemi, S. Lundin, K. Karhu, T. Laurén, M. et al. “Exhaust Particle Number in Off-Road Engines of Different Generations,” SAE Technical Paper 2009-01-1869 2009 10.4271/2009-01-1869
- Niemi, S. Törnvall, J. Laurén, M. Nousiainen, P. “Optimization of Some Injection Parameters in a Common-Rail Non-Road Diesel Engine,” SAE Technical Paper 2009-01-1833 2009 10.4271/2009-01-1833
- Liu, Y. Tao, F. Foster, D. Reitz, R. “Application of A Multiple-Step Phenomenological Soot Model to HSDI Diesel Multiple Injection Modeling,” SAE Technical Paper 2005-01-0924 2005 10.4271/2005-01-0924
- Aghav, Y V Lakshminarayanan, P A Babu, M K G Uddin, A Dani, A D 2008 ‘Validating the phenomenological smoke model at different operating conditions of DI diesel engines’ Journal of Engineering for Gas Turbines and Power 130 1
- Clark, N. Tatli, E. Barnett, R. Wayne, W. et al. “Characterization and Abatement of Diesel Crankcase Emissions,” SAE Technical Paper 2006-01-3372 2006 10.4271/2006-01-3372
- Pagnozzi, R. Pereira, D. Spielmann, L. Bastías, P. “Methodology Applied on the Validation of Air/Oil Separation Systems Integrated to the Crankcase Ventilation Valve,” SAE Technical Paper 2007-01-2757 2007 10.4271/2007-01-2757
- Gokten, M. Kurnaz, G. Ergen, O. Copley, D. “The Development of High Efficiency Crankcase Ventilation and Oil Mist Separator for a Heavy-Duty Diesel Application,” SAE Technical Paper 2008-01-2687 2008 10.4271/2008-01-2687
- Tatli, E. Clark, N. “Crankcase Particulate Emissions from Diesel Engines,” SAE Int. J. Fuels Lubr. 1 1 1334 1344 2009 10.4271/2008-01-1751
- Kissner, G. Ruppel, S. “Highly Efficient Oil Separation Systems for Crankcase Ventilation,” SAE Technical Paper 2009-01-0974 2009 10.4271/2009-01-0974
- Bosteels, D Searles, R A 2002 ‘Exhaust emission catalyst technology’ Platinum Metals Review 46 1 27 36
- Williams, A M Garner, C P 2009 ‘Correcting mass measurement of diesel particulate filters at non-ambient temperatures’ Proc. IMechE, Part D: Journal of Automobile Engineering 223 1 99 105
- Kozlov, A. Harris, T. Salyards, C. “Engine Test for DOC Quenching in DOC-DPF System for Non-Road Applications,” SAE Int. J. Fuels Lubr. 3 1 397 405 2010 10.4271/2010-01-0815
- Kramer, J. Pfahl, U. Bruestle, C. Diewald, R. et al. “The PM-Metalit: A PM control technology for Tier 4 Off-Highway Applications,” SAE Technical Paper 2009-01-2838 2009 10.4271/2009-01-2838
- Wang, X Wu, H Zhang, Q Hansen, A C Malinga, B 2006 ‘Lean NO x trap storage model for diesel engine aftertreatment control and diagnosis’ Transactions of the ASABE 49 6 1687 1693
- Johannessen, T. Schmidt, H. Svagin, J. Johansen, J. et al. “Ammonia Storage and Delivery Systems for Automotive NOx Aftertreatment,” SAE Technical Paper 2008-01-1027 2008 10.4271/2008-01-1027
- Dudley, W M 1947 ‘A new approach to cam design’ Machine Design 184 143 148
- Dudley, W.M. 1948 “New Methods in Valve Cam Design” SAE Quarterly Transactions 2 19 33
- Thoren, T.R. Engemann, H.H. Stoddart, D.A. 1952 “Cam Design as Related to Valve Train Dynamics” SAE Quarterly Transactions 6 1 1 14
- Stoddart, D A 1953 ‘Polydyne cam design’ Machine Design January March 175 216
- De Ojeda, W. “Effect of Variable Valve Timing on Diesel Combustion Characteristics,” SAE Technical Paper 2010-01-1124 2010 10.4271/2010-01-1124
- Minato, A. Shimazaki, N. “Development of the Total Engine Simulation System (TESS) and Its Application for System Investigation of Future Diesel Engine,” SAE Int. J. Engines 4 1 1708 1723 2011 10.4271/2011-01-1298
- Larsen, G. “Research Engine for Evaluating the Effects of Variable Compression Ratio (VCR) and/or Variable Valve Timing (VVT),” SAE Technical Paper 910053 1991 10.4271/910053
- Ryan, T. Callahan, T. Mehta, D. “HCCI in a Variable Compression Ratio Engine-Effects of Engine Variables,” SAE Technical Paper 2004-01-1971 2004 10.4271/2004-01-1971
- Miller, R H 1947 ‘Supercharging and internal cooling cycle for high output’ Transactions of the ASME 69 5 453 457
- Cao, Y. “Thermodynamic Cycles of Internal Combustion Engines for Increased Thermal Efficiency, Constant-Volume Combustion, Variable Compression Ratio, and Cold Start,” SAE Technical Paper 2007-01-4115 2007 10.4271/2007-01-4115
- Gheorghiu, V. “CO 2 -Emission Reduction by Means of Enhanced Thermal Conversion Efficiency of Ice Cycles,” SAE Technical Paper 2009-24-0081 2009 10.4271/2009-24-0081
- Boretti, A. Masudi, H. Scalzo, J. “Alternative Crankshaft Mechanisms And Kinetic Energy Recovery Systems For Improved Fuel Economy Of Light Duty Vehicles,” SAE Technical Paper 2011-01-2191 2011
- Su, W H Lin, T J Zhao, H Pei, Y Q 2005 ‘Research and development of an advanced combustion system for the direct injection diesel engine’ Proc. IMechE, Part D: Journal of Automobile Engineering 219 241 252
- Su, W Lu, Y Pei, Y Zhao, F 2009 ‘Effect of charge density on emissions in a HD-LTC diesel engine by retarding intake valve timing and rising boost pressure’ IMechE Proceedings of Internal Combustion Engines: Performance, Fuel Economy and Emissions December 8 9 London, UK Chandos Publishing 89 97
- Su, W. Lu, Y. Yu, W. Wang, C. et al. “High Density-Low Temperature Combustion in Diesel Engine Based on Technologies of Variable Boost Pressure and Intake Valve Timing,” SAE Technical Paper 2009-01-1911 2009 10.4271/2009-01-1911
- Kluck, C. Olsen, P. Skriba, S. “Lubrication System Design Considerations For Heavy-Duty Diesel Engines,” SAE Technical Paper 861224 1986 10.4271/861224
- Mian, M. “Design and Analysis of Engine Lubrication Systems,” SAE Technical Paper 970637 1997 10.4271/970637
- Klingebiel, F. Kahlstorf, U. “Simulating Engine Lubrication Systems with 1-D Fluid Flow Models,” SAE Technical Paper 2000-01-0284 2000 10.4271/2000-01-0284
- ISO Standard 6621-1 2007 ‘Internal combustion engines - Piston rings - Part 1: Vocabulary’
- Kamo, L S 1999 ‘Preliminary investigation of developmental low heat rejection engine piston tribology’ ASME 1999 Fall Technical Conference , paper No. 99-ICE-218, ICE 33-1 155 164
- ISO Standard 5130 2007 ‘Acoustics - Measurements of sound pressure level emitted by stationary road vehicles’
- ISO Standard 13332 2000 ‘Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet’
- ISO Standard 3046-5 2001 ‘Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations’
- Sui, J. Hoppe, C. Hirshey, J. “Powertrain Mounting Design Principles to Achieve Optimum Vibration Isolation with Demonstration Tools,” SAE Technical Paper 2003-01-1476 2003 10.4271/2003-01-1476
- Carlucci, P. Ficarella, A. Laforgia, D. “Study of the Influence of the Injection Parameters on Combustion Noise in a Common Rail Diesel Engine Using ANOVA and Neural Networks,” SAE Technical Paper 2001-01-2011 2001 10.4271/2001-01-2011
- Carlucci, P. Ficarella, A. Chiara, F. Giuffrida, A. et al. “Preliminary Studies on the Effects of Injection Rate Modulation on the Combustion Noise of a Common Rail Diesel Engine,” SAE Technical Paper 2004-01-1848 2004 10.4271/2004-01-1848
- Siano, D. Valentino, G. Corcione, F. Bozza, F. et al. “Experimental and Numerical Analyses of Performances and Noise Emission of a Common Rail Light Duty D.I. Diesel Engine,” SAE Technical Paper 2007-24-0017 2007 10.4271/2007-24-0017
- Costa, M. Siano, D. Allocca, L. Montanaro, A. et al. “Light Duty Diesel Engine: Optimization of Performances, Noxious Emission and Radiated Noise,” SAE Int. J. Engines 2 2 740 748 2010
- Costa, M. Siano, D. Valentino, G. Corcione, F. et al. “Prediction and Optimization of the Performances, Noxious Emissions and Radiated Noise of a Light Duty Common-Rail Diesel Engine,” SAE Technical Paper 2009-24-0011 2009 10.4271/2009-24-0011
- Xin, Q Zheng, J 2009 ‘Theoretical analysis of internal combustion engine miscellaneous heat losses’ SAE paper 2009-01-2881
- Killmann, I G Tholen, P 1999 ‘Aircooled engines’ Challen, B Baranescu, R Diesel Engine Reference Book 2nd SAE International Warrendale, PA 424 448
- Burke, J Haws, J 2001 ‘Vehicle thermal systems modeling using FLOWMASTER2’ SAE paper 2001-01-1696
- Chang, F-C Malipeddi, S Uppuluri, S Shapiro, S 2003 ‘Underhood thermal management of off-highway machines using 1D-network simulations’ SAE paper 2003-01-3405
- Malipeddi, S R 2003 ‘Guidelines for underhood thermal management of off-highway vehicles’ Vehicle Thermal Management Systems 6 879 888
- Cotton, N 2004 ‘New materials and new design criteria for heat exchangers’ Metall 58 7-8 435 439
- Winterbone, D E Nichols, J R Alexander, G I 1985 ‘Efficiency of the manifolds of turbocharged engines’ IMechE Proc Instn Mech Engrs 199 D2 137 149
- Fijalkowski, S Nakonieczny, K 1997 ‘Operation of exhaust systems of turbocharged diesel engines identified by means of exergy analysis’ Proc. IMechE, Part D: Journal of Automobile Engineering 211 391 406
- McGuire, J Tett, D Patterson, A 2009 ‘Electric-turbocompounding on heavy duty diesel engines’ VDI Berichte 2068 211 214
- Japikse, D 2000 ‘Agile engineering and the restructuring of modern design’ 40th Israel Annual Conference on Aerospace Science Tel-Aviv and Haifa, Israel February 23 24
- Japikse, D 2003 ‘Turbomachinery design with an agile engineering system’ 2003 JSME Fluid Engineering Conference Osaka, Japan September 19 20
- Obi, M Suzuki, M Matsuura, N 2000 ‘Structural analysis and shape optimization in turbocharger development' Proceedings of the 2nd MSC Worldwide Automotive Users’ Conference Dearborn, MI
- Obi, M Takei, N Matsuura, N 1999 ‘Integration of CFD and thermal stress analysis for turbochargers’ Proceedings of the 1st MSC Worldwide Automotive Users' Conference Munich, Germany September 20 22
- Moroz, L Govoruschenko, Y Pagur, P 2005 ‘Axial turbine stages design: 1D/2D/3D simulation, experiment, optimization’ Proceedings of ASME Turbo Expo 2005: Power for Land, Sea and Air , GT2005-68614 Reno-Tahoe, NV June 6 9
- Costall, A W McDavid, R M Martinez-Botas, R F Baines, N C 2009 ‘Pulse performance modeling of a twin entry turbocharger turbine under full and unequal admission’ Proceedings of ASME Turbo Expo 2009 Orlando, FL June 8 12
- Kanoglu, M Dincer, I Rosen, M A 2008 ‘Exergetic performance investigation of a turbocharged stationary diesel engine’ International Journal of Exergy 5 2 193 203
- Rakopoulos, C D Giakoumis, E G 2006 ‘Comparative first- and second-law parametric study of transient diesel engine operation’ Energy 31 1927 1942
- Howes, P. Law, D. Dissanayake, D. “The Electronic Governing of Diesel Engines for the Agricultural Industry,” SAE Technical Paper 860146 1986 10.4271/860146
- Moore-McKee, A L 1994 ‘Application builder: a method for building application software for Caterpillar electronic engines’ ASME Internal Combustion Engine Division (Publication) ICE 22 67 72
- Banning, R Johnson, M A Grimble, M J 1997 ‘Advanced control design for marine diesel engine propulsion systems’ Transactions of the ASME, Journal of Dynamic Systems, Measurement and Control 119 2 167 174
- Komar, I Antonić, R. Kulenović, Z. 2009 ‘Experimental tuning of marine diesel engine speed controller parameters on engine test bed’ Transactions of Famena 33 2 51 70
- Corti, E. Solieri, L. “Rapid Control Prototyping System for Combustion Control,” SAE Technical Paper 2005-01-3754 2005 10.4271/2005-01-3754
- Maaϐ, B. Stobart, R Deng, J 2009 ‘Diesel engine emissions prediction using parallel neural networks’ Proceedings of 2009 American Control Conference St. Louis, MO June 10 12 1122 1127
- Wu, K Zhang, Q Hansen, A Alleyne, A 2002 ‘A multiple locally-linearized diesel engine model’ Transactions of the American Society of Agricultural Engineers 45 2 273 280
- Körfer, T. Tomazic, D Ruhkamp, L Kinoo, B Tatur, M Lincks, M Schnorbus, T Adolph, D 2009 ‘New air control logics for HD diesel engines for most stringent emission demands and best customer value in terms of fuel consumption and engine response’ Proceedings of the ASME 2009 Internal Combustion Engine Division Fall Technical Conference Lucerne September 20 24 243 253
- Nagar, N He, X Iyengar, V Acharya, N Kalinowski, A Kotrba, A Gardner, T Yetkin, A 2010 ‘Real time implementation of DOC-DPF models on a production-intent ECU for controls and diagnostics of a PM emission control system’ SAE International Journal of Commercial Vehicles 2 2 222 233
- Nanjundaswamy, H. Tatur, M. Tomazic, D. Dahodwala, M. et al. “Development and Calibration of On-Board-Diagnostic Strategies Using a Micro-HiL Approach,” SAE Technical Paper 2011-01-0703 2011 10.4271/2011-01-0703