This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Robust Design of a Light Weight Flush Mount Roof Rack
Technical Paper
2011-01-1274
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Roof racks are designed for carrying luggage during customers' travels. These rails need to be strong enough to be able to carry the luggage weight as well as be able to withstand aerodynamic loads that are generated when the vehicle is travelling at high speeds on highways. Traditionally, roof rail gage thickness is increased to account for these load cases (since these are manufactured by extrusion), but doing so leads to increased mass which adversely affects fuel efficiency.
The current study focuses on providing the guidelines for strategically placing lightening holes and optimizing gage thickness so that the final design is robust to noise parameters and saves the most mass without adversely impacting wind noise performance while minimizing stress. The project applied Design for Six Sigma (DFSS) techniques to optimize roof rail parameters in order to improve the load carrying capacity while minimizing mass.
The analysis model consisted of a finite element model of a roof rack system. The numerical simulation runs were made on LS-Dyna software. Taguchi's orthogonal array was used to build factorial response plots for signal to noise ratio and main effects. Load carrying capacity and mass were considered as two primary responses and the optimum design was determined by maximizing load capacity while minimizing mass. Some of the important parameters being considered were part thickness, material selection, hole size, hole spacing, hole to attachment interface, and crossbar location. Based on response plots, these parameters were rank ordered for best performance. The results provided guidelines and enormous benefits to engineers for designing light weight flush mounted roof racks in current and future vehicles.
Recommended Content
Technical Paper | Optimization of Vehicle Damping Sheets Position Based on Energy Calculation |
Technical Paper | Analytical Robust Door Hinge System Design Taguchi Approach |
Technical Paper | Criticality of Tube Bending Through CAE Understanding |
Authors
Topic
Citation
Mandadapu, S., Chinta, B., Jutila, B., and Schoenefeld, M., "Robust Design of a Light Weight Flush Mount Roof Rack," SAE Technical Paper 2011-01-1274, 2011, https://doi.org/10.4271/2011-01-1274.Also In
Reliability and Robust Design in Automotive Engineering, 2011
Number: SP-2306; Published: 2011-04-12
Number: SP-2306; Published: 2011-04-12
References
- Fowlkes, William Y. Creveling, Clyde M. “Engineering Methods for Robust Product Design Using Taguchi Methods in Technology and Product Development,” Addison-Wesley publication 1995
- Creveling, C.M. et. al. “Design For Six Sigma,” 0-13-0092231 2003
- Taguchi, Genichi Chowdhury, Subir Wu, Yuin “Taguchi's Quality Engineering Handbook,” Wiley publication 2004