This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Efficient Hybrid Approach for Design of Automotive Wheel Bearings
Technical Paper
2011-01-0091
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Wheel bearings play a crucial role in the mobility of a vehicle by minimizing motive power loss and providing stability in cornering maneuvers. Detailed engineering analysis of a wheel bearing subsystem under dynamic conditions poses enormous challenges due to the nonlinearity of the problem caused by multiple factional contacts between rotating and stationary parts and difficulties in prediction of dynamic loads that wheels are subject to. Commonly used design methodologies are based on equivalent static analysis of ball or roller bearings in which the latter elements may even be represented with springs. In the present study, an advanced hybrid approach is suggested for realistic dynamic analysis of wheel bearings by combining lumped parameter and finite element modeling techniques. A validated lumped parameter representation serves as an efficient tool for the prediction of radial wheel load due to ground reaction which is then used in detailed finite element analysis that automatically accounts for contact forces in an explicit formulation.
Recommended Content
Citation
Mahala, M. and Deb, A., "An Efficient Hybrid Approach for Design of Automotive Wheel Bearings," SAE Technical Paper 2011-01-0091, 2011, https://doi.org/10.4271/2011-01-0091.Also In
References
- Lovell, M. R. Khonsari, M. M. Marangoni, R. D. “A finite element analysis of the frictional forces between a cylindrical bearing element and MoS 2 , coated and uncoated surfaces” Wear 194 1996 60 70
- Lovell, M. R. Khonsari, M. M. Marangoni, R. D. “Parameter Identification of Hysteresis Friction for Coated Ball Bearings Based on Three-Dimensional FEM Analysis” Journal of Tribology 119 1997
- Lovell, M. R. Khonsari, M. M. Marangoni, R. D. “Frictional Analysis of MoS 2 Coated Ball Bearings: A Three-Dimensional Finite Element Analysis” Journal of Tribology 119 1997
- Fritzson, Dag Fritzson, Peter Persson, Tommy “Rolling Bearing Simulation on MIMD Computers” International Journal of High Performance Computing Applications 11 4 1997 299 313
- Fritzson, Dag Stacke, Lars-Erik “Simulation of Rolling Element Bearings” The Scandinavian Conference on Simulation and Modeling 1999
- Fritzson, Dag Ståhl, Jonas Nakhimovski, Iakov “Transmission line co-simulation of rolling bearing applications” The 48 th Scandinavian Conference on Simulation and Modeling, No. 27 2007 24 39
- Siemers, Alexander Fritzson, Dag “A Meta-Modeling Environment for Mechanical System Co-Simulations” The 48 th Scandinavian Conference on Simulation and Modeling, No. 27 2007 109 116
- Houpert, L. “A Uniform Analytical Approach for Ball and Roller Bearings Calculations” Journal of Tribology 119 1997
- Jackson, Robert Chusoipin, Itti Green, Itzhak “A Finite Element Study of the Residual Stress and Deformation in Hemispherical Contacts” Journal of Tribology 127 2005
- Kang, Yuan Shen, Ping-Chen Huang, Chih-Ching Shyr, Shyh-Shyong Chang, Yeon-Pun “A modification of the Jones-Harris method for deep-groove ball bearings” Tribology International 39 2006 1413 1420
- Jiang, Yanyao Sehitoglu, Huseyin “Rolling contact stress analysis with the application of a new plasticity model” Wear 191 1996 35 44
- Xu, Biqiang Jiang, Yanyao “Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact” Journal of Tribology 124 2002
- Jiang, Yanyao Xu, Biqiang Sehitoglu, Huseyin “Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact” Journal of Tribology 124 2002
- Sun, Y. Bloyce, A. Bell, T. “Finite element analysis of plastic deformation of various TiN coating/substrate systems under normal contact with a rigid sphere” Thin Solid Films 271 1995 122 131
- Wei, Yangang Qin, Yi Balendra, Raj Jiang, Qingyu “FE analysis of a novel roller form: a deep end-cavity roller for roller-type bearings” Journal of Materials Processing Technology 145 2004 233 241
- Kawamoto, Yasuhiro Suda, Yoshihiro Inoue, Hirofumi Kondo, Takuhiro “Modeling of Electromagnetic Damper for Automobile Suspension” Journal of System Design and Dynamics 1 3 2007 524 535
- Parthasarathy, S.S. Srinivasa, Y.G. “Design of an active suspension system for a quarter-car road vehicle model using model reference control” Journal Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 220 2 2006 91 107
- Chang, Shih-Lang Wu, Chi-haw “Design of an Active Suspension System Based on a Biological Model” Proceedings of the American Control Conference Albuquerque New Mexico 1997
- Fischer, Daniel Isermann, Rolf “Mechatronic semi-active and active vehicle suspensions” Control Engineering Practice 12 11 2004 1353 1367
- Çetin, Şaban Demir, Özgür “Fuzzy PID Controller with Coupled Rules for a Nonlinear Quarter Car Model” Proceedings of World Academy of Science Engineering and Technology 31 2008
- AL-HoIou, Nizar Weaver, Onathan Lahdhiri, Tarek Sung, Dae “Sliding Mode-based Fuzzy Logic Controller for a Vehicle Suspension System” Proceedings of the American Control Conference San Diego 1999
- Huang, Shiuh-Jer Chen, Hung-Yi “Adaptive sliding controller with serf-tuning fuzzy compensation for vehicle suspension control” Mechatronics 16 2006 607 622
- Chen, Hung-Yi Huang, Shiuh-Jer “A new model-free adaptive sliding controller for active suspension system” International Journal of Systems Science 39 1 2008 57 69
- Mehra, Raman K. Amin, Jayesh N. Hedrick, Karl J. Osorio, Carlos Gopalasamy, Srinivasan “Active Suspension Using Preview Information and Model Predictive Control” Proceedings of the 1997 IEEE International Conference on Control Applications 1997
- Roh, H.S. Park, Y. “Stochastic optimal preview control of an active vehicle suspension” Journal of Sound and Vibration 220 2 1999 313 330
- Hong, Keum-Shik Jeon, Dong-Seop Sohn, Hyun-Chul “A New Modeling of the Macpherson Suspension System and its Optimal Pole-Placement Control” Proceedings of the 7th Mediterranean Conference on Control and Automation (MED99) Haifa, Israel 1999
- Truscott, A. J. “Composite active suspension for automotive vehicles” Computing and Control Engineering Journal 1994
- Ramli, R Pownall, M Levesley, M Crolla, D A “Dynamic analysis of semi-active suspension systems using a co-simulation approach” Multi-body Dynamics: Monitoring and Simulation Techniques III 2004 391 399
- Papalukopoulos, C. Natsiavas, S. “Nonlinear biodynamics of passengers coupled with quarter car models” Journal of Sound and Vibration 304 1-2 2007 50 71
- Rehan, Mohamed Saifuddin, Muhammad Yusof, Mustafa Abd. Rahman, Roslan “Parametric Studies on Tramcar Suspension System” Proceedings the 1 st International Conference on Natural Resources Engineering and Technology 2006
- Lazovic, Tatjana Ristivojevic, Mileta Mitrovic, Radivoje “Mathematical Model of Load Distribution in Rolling Bearing” FME Transactions 36 4 2008 189 196
- Marines, I. Dominguez, G. Baudry, G. Vittori, J.-F. Rathery, S. Doucet, J.-P. Bathias, C. “Ultrasonic fatigue tests on bearing steel AISI-SAE 52100 at frequency of 20 and 30 kHz” International Journal of Fatigue 25 2003 1037 1046 10.1016/S0142-1123(03)00161-0
- Harris, Tedric A “Rolling Bearing Analysis” 4th 2001 0-471-35457-0