This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Die Wear Evaluation for Stamping TRIP700 and DP980 B-Pillar
Technical Paper
2011-01-0038
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
As more and more high strength and advanced high strength steels are being utilized into automotive body panels, structural beams and rails to reduce weight to meet the Café (Corporate Average Fuel Economy) requirements, wear of stamping dies is becoming a major issue. Many types of coatings/surface treatments such as: thermal spray, ion nitriding, chrome plating, PVD, CVD, and TD coatings are being used in stamping plants. Identifying a cost-effective coating and the die material based on the types of the advanced high strength steels is difficult since there is little data available. None the less on the real die. This paper will discuss the evaluation of the coatings and die materials on a B-pillar draw die. The coatings and die materials were chosen based on laboratory design of experiment tests and the typical die materials used in stamping plants.
Recommended Content
Citation
Yao, Z., "Die Wear Evaluation for Stamping TRIP700 and DP980 B-Pillar," SAE Technical Paper 2011-01-0038, 2011, https://doi.org/10.4271/2011-01-0038.Also In
References
- Coating Selection Materials performance 43 2004 62 63
- Stappen, M.V. Kerkhhofs, M. Introduction in industry of duplex treatment consisting of plasma nitriding and PVD deposition of TiN Surface & Coatings Technology 62 1993 655 661
- Shatov, Yu.S. Gorbunov, I.P. Kozyr', I.G. Sharshakov, I.M. Bakhtin, S.V. Diffusion chrome-plating the shaping parts of the stamping dies for cold-molding Stal' , n 4 63 65 Apr 1997
- Gomersal, A. Laser in Materials Processing IFS Publications Ltd. UK 98 1986
- Bhushan, B. Gupta, B.K. Handbook of Tribology 1992 14.50
- Kuniaki, D. Application of DLC coating to ironing die JSME international journal. Series A. Solid mechanics and material engineering 48 4 2006 286 291
- Zaidi, H. Djamai, A. Chin, K.J. Mathia, T. Characterization of DLC coating adherence by scratch testing Tribology International 39 2006 124 128
- Nordin, M. Larsson, M. Deposition and characterization of multilayered PVD TiN/CrN coating on cemented carbide Surface and Coatings Technology 116-119 1999 108 115
- Torsten, D. New PVD/PACVD coating applications Advanced materials & processes 163 6 2005 62 64
- Kenji, Y. Katsuhiro, M. Effect of hydrogenated DLC coating hardness on the tribological properties under water lubrication Tribology international 39 2006 1609 1614
- Siu, J.H.W. Li, L.K.Y. An investigation of the effect of surface roughness and coating thickness on the friction and wear behavior of a commercial MoS2-metal coating on AISI 400C steel Wear 237 2000 283 287
- Sresomroeng, B. Lawanwong, K. Premanond, V. Hato, R. Kaewtatip, P. Koga, A. K, N. Tribological behavior of thin film coatings against high strength steels International Journal of Abrasive Technology 2009 2 3 313 328
- Murakawa, M. Koga, N. Watanabe, S. Takeuchi, S. Tribological behavior of amorphous hard carbon films against zinc-plated steel sheets Surface and Coatings Technology 108-109 1998 425 430
- Huang, J. Ouyang, F. Yu, G. Effect of film thickness and Ti interlayer on the structure and properties of nanocrystalline TiN thin films on AISI D2 steel Surface & Coatings Technology 201 2007 7043 7053
- Avelar-Batista, J.C. Spain a, E. Housden, J. Fuentes, G.G. Rebole, R. Rodriguez, R. Montala, F. Carreras, L.J. Tate, T.J. Characterization of Pristine and Recoated electron beam evaporation plasma-assisted physical vapor deposition Cr-N coatings on AISI M2 steel and WC-Co substrates Thin Solid Films 491 2005 177 183
- Hilton, M. R. Vasdentop, G. J. Salmeron, M. Somorjal, G. A. TIN Coatings on M2 Steel Produced by Plasma-Assisted Chemical Vapor Deposition Thin Solid Films 154 1987 377 386
- Sen, U. Wear properties of niobium carbide coatings performed by pack method on AISI 1040 steel Thin Solid Films 483 2005 152 157
- Zeghni, A.E. Hashmi, M.S.J. Comparative wear characteristics of tin and tic coated and uncoated tool steel Journal of Materials Processing Technology 155-156 2004 1923 1926
- Yamamoto, K. Kujime, S. Takahara, K. Structural and mechanical property of Si incorporated (Ti,Cr,Al)N coatings deposited by arc ion plating process Surface & Coatings Technology 200 2005 1383 1390
- Hoffmann, F. Mayr, P. Improvement of surface properties by combined processes - A comparison: CVD plus induction hardening against carburizing plus CVD Metallurgia Italiana 94 5 25 31 2002
- Dyrda, K. Sayer, M. Critical loads and effective frictional force measurements in the industrial scratch testing of TiN on M2 tool steel Thin Solid Films 355-356 1999 277 283