This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
University of Idaho's Flex-Fuel Two-Stroke Snowmobile
Technical Paper
2010-32-0084
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The University of Idaho's (UI's) entry into the 2009 SAE Clean Snowmobile Challenge (CSC) was a semi-direct-injection (SDI) two-stroke powered REV-XP snowmobile modified to use flex-fuel. The flex-fuel engine produces stock engine power on any blend of ethanol and gasoline from E10 to E85. The emissions output was reduced using an oxidation catalyst located after the exhaust silencer. Noise from the engine compartment was reduced by custom-carbon fiber hood and side panels, which allowed placement of extra sound absorbing materials. The UICSC design produces 80.5 kW, is lightweight at 238 kg wet, and achieves a fuel economy of 5.65 km/L on E85 fuel. The UI snowmobile achieved Third Place in the competition, while producing the best fuel economy and winning several other awards, including Best Acceleration, Best Value, Best Ride (fueled class) and Best Subjective Handling.
Ethanol content feedback was accomplished using a flex-fuel sensor that continuously measures the ethanol content of the fuel. A custom circuit was built to relay the information from the flex-fuel sensor to the engine control unit (ECU) and display the ethanol content to the rider using an LED display.
The University of Idaho has developed a cost-effective semi-direct-injected two-stroke snowmobile engine capable of running on ethanol/gasoline flex-fuel. The SDI two-stroke snowmobile maintains the mechanical simplicity and low weight avid riders enjoy, without sacrificing the clean and quiet characteristics necessary to meet current and upcoming standards.
Authors
Topic
Citation
Britanyak, P., Fuhrman, A., Dixon, D., Den Braven, K. et al., "University of Idaho's Flex-Fuel Two-Stroke Snowmobile," SAE Technical Paper 2010-32-0084, 2010, https://doi.org/10.4271/2010-32-0084.Also In
References
- Niven, R.K. “Ethanol in gasoline: environmental impacts and sustainability review article,” Renewable and Sustainable Energy Reviews 9 Elsevier 536 555 2005
- The SAE Clean Snowmobile Challenge 2009 Rules SAE International 2008
- Lela, C.C. White, J.J. “Laboratory Testing of Snowmobile Emissions” Report Number SwRI 08.05486 Southwest Research Institute San Antonio July 2002
- United States Environmental Protection Agency February 28 2006
- United States Department of the Interior National Park Service Special Regulations; Areas of the National Park System, Final Rule November 10 2004
- SAE International Surface Vehicle Recommended Practice “Maximum Exterior Sound Level for Snowmobiles,” SAE Standard J192 March 2003
- The SAE Clean Snowmobile Challenge Results 2002 SAE International 2002
- The SAE Clean Snowmobile Challenge Results 2003 SAE International 2003
- The SAE Clean Snowmobile Challenge Results 2004 SAE International 2004
- The SAE Clean Snowmobile Challenge Results 2005 SAE International 2005
- The SAE Clean Snowmobile Challenge Results 2006 SAE International 2006
- The SAE Clean Snowmobile Challenge Results 2007 SAE International 2007
- The SAE Clean Snowmobile Challenge Results 2008 SAE International 2008
- Morikawa, K. Takimoto, H. Ogi, T. “A Study of Direct Fuel Injection Two-Stroke Engine for High Specific Power Output and High Engine Speed,” SAE Technical Paper 1999-01-3288 1999 10.4271/1999-01-3288
- Blair, G.P. “Design and Simulation of Two-Stroke Engines,” SAE International Warrendale, PA 978-1-56091-685-7 1996
- Stone, R. “Introduction to Internal Combustion Engines” Antony Rowe Ltd. Chippenham, Wiltshire 1997
- Heywood, J.B. “Internal Combustion Engine Fundamentals” McGraw Hill, Inc. 1988
- Nuti, M. “Emissions from Two-Stroke Engines,” SAE International Warrendale, PA 0-7680-0215-X 1998
- Bradbury, N. French, F. DenBraven, K. “Improving the University of Idaho Clean Snowmobile,” SAE Technical Paper 2003-32-0075 2003 10.4271/2003-32-0075
- Zhao, F. Harrington, D.L. Lai, M.-C.D. “Automotive Gasoline Direct-Injection Engines,” SAE International Warrendale, PA 978-0-7680-0882-1 2002 10.4271/R-315
- Yucesu, H.S. Topgul, T. Cinar, C. Okur, M. “Effect of ethanol - gasoline blends on engine performance and exhaust emissions in different compression ratios,” Applied Thermal Engineering 26 Elsevier 2272 2278 2006
- Wright, C.W. White, J.J. “Development and Validation of a Snowmobile Engine Emission Test Procedure,” SAE Technical Paper 982017 1998 10.4271/982017
- Harker, N. DenBraven, K.R. Johnson, J. Findlay, A. “University of Idaho's Clean Snowmobile Design Using a Direct-Injection Two-Stroke Engine,” SAE Technical Paper 2008-32-0031 2008 10.4271/2008-32-0031
- Harker, N. “System Design and Performance Comparison of Blended Gasoline/Ethanol Fuels in Semi-Direct and Direct Injected Two-Stroke Engines.” University of Idaho 2009
- Gage Certificate of Analysis 3 04 08
- Strauss, S. Zeng, Y. Montgomery, D.T. “Optimization of the E-TEC™ Combustion System for Direct-Injected Two-Stroke Engines Toward 3-Star Emissions,” SAE Technical Paper 2003-32-0007 2003 10.4271/2003-32-0007
- Heywood, J. Sher, E. “The Two-Stroke Cycle Engine, Its Development, Operation, and Design” Taylor and Francis Inc., Braun-Braumfield Ann Arbor, MI 1999
- Bradbury, N. Findlay, A. Johnson, J. Van Patten, E. et al. “University of Idaho's Clean Snowmobile Design Using a Direct-Injection Two-Stroke,” SAE Technical Paper 2006-32-0050 2006 10.4271/2006-32-0050
- Strauss, S. Zeng, Y. “The Effect of Fuel Spray Momentum on Performance and Emissions of Direct-Injected Two-Stroke Engines,” SAE Technical Paper 2004-32-0013 2004 10.4271/2004-32-0013
- Wasil, J.R. Montgomery, D.T. Strauss, S. Bagley, S.T. “Life Assessment of PM, Gaseous Emissions, and Oil Usage in Modern Marine Outboard Engines,” SAE Technical Paper 2004-32-0092 2004 10.4271/2004-32-0092
- Johnson, W.P. Wiedemeier, G.P. Gebert, K. “Electronic Direct Fuel Injection (EDFI) for Small Two-Stroke Engines,” SAE Technical Paper 1999-01-3312 1999 10.4271/1999-01-3312