This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mixture Formation Analysis in a Direct Injection Spark Ignition (DISI) Engine
Technical Paper
2010-01-1460
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper deals with the application of a natural gas direct injection spark ignition single- cylinder engine model.
The research scope includes the air flow characterization during compression stroke and also the charge stratification. Piston bowl effects are analyzed during the gas jet deflection towards the spark plug (wall-guided effect) in order to guarantee the charge stratification in this region, as well as an equivalence ratio which will result in the mixture combustion.
The influence of two different swirl ratios in the parameters discussed above is analyzed.
The goal is to obtain the evolution of the methane concentration in the cylinder during the gas jet development and the compression stroke. This result is an important reference to determine parameters such as the start of injection and the spark plug position so it could be applied in order to avoid the misfire occurrence.
Authors
Topic
Citation
Pinheiro Martins, F. and De Souza, F., "Mixture Formation Analysis in a Direct Injection Spark Ignition (DISI) Engine," SAE Technical Paper 2010-01-1460, 2010, https://doi.org/10.4271/2010-01-1460.Also In
References
- A-Aziz, A. Firmansyah “The Effect of Fuel Rail Pressure on the Performance of a CNG-Direct Injection Engine,” SAE Technical Paper 2009-01-1498 2009
- ADOMEIT, P. VOGT, B. Computational analysis of flow and mixture formation in DISI engines INTERNATIONAL MULTIDIMENSIONAL ENGINE MODELING USER'S GROUP MEETING 12. 2002 Detroit. Michigan SAE 2002
- BADR, O. ALSAYED, N. MANAF, M. A parametric study on the lean misfiring and knocking limits of gas-fueled spark ignition engines Applied Thermal Engineering 18 7 579 594 1998
- CHENG, X. Modeling injection and ignition in direct injection natural gas engines 2008 University of Toronto Canada
- CHO, H. M. HE, B. Spark ignition natural gas engines: a review Energy Conversion and Management 48 608 618 2007
- Diwakar, R. Singh, S. “Importance of Spray-Bowl Interaction in a DI Diesel Engine Operating under PCCI Combustion Mode,” SAE Technical Paper 2009-01-0711 2009
- HEYWOOD, J.B. Internal combustion engine fundamentals New York McGraw-Hill 1988 930 McGraw-Hill Series in Mechanical Engineering
- Herman, S.A. Ganesan, V. “The Effect of Induced Swirl Pattern on TDC Flow Field in a HSDI Diesel Engine,” SAE Technical Paper 2005-26-319 2005
- GLASSMAN, I Combustion 2 Orlando Academic Press 1987 524
- GUNASEKARAN, E. J. GANESAN, V. Mixture preparation strategies for a four valve centrally injected flat piston DISI engine Joint Rail Conference and Internal Combustion Engine Division Spring Technical Conference, ASME/IEEE, 2007, Pueblo New York ASME 2007
- IKEGAMI, M. HORIBE, K. KOMATSU, G. Numerical simulation of flows in an engine cylinder Bulletin of JSME 29 250 Abr. 1986
- KUMAR, T. A. MALLIKARJUNA, J. M. GANESAN, V. Effect of injection timing on fuel-air mixing and combustion in a direct injection stratified charge SI engine Joint Rail Conference and Internal Combustion Engine Division Spring Technical Conference, ASME/IEEE, 2007, Pueblo New York ASME 2007
- Kuo, T.-W. Bracco, F.V. “On the Scaling of Transient Laminar, Turbulent, and Spray Jets,” SAE Technical Paper 820038 1984
- Ohm, I.Y. Cho, Y.S. “Mechanism of Axial Stratification and Its Effect in an SI Engine,” SAE Technical Paper 2000-01-2843 2000
- Olmo, L. Thornton, J “CFD Analysis of Mixture Formation and Combustion Process for High Performance DI Gasoline Engine,” SAE Technical Paper 2005-01-0214 2005
- OULLETTE, P. Direct injection of natural gas for fueling engines 1996 Vancouver University of British Columbia 1996
- PAYRI, F. et al. CFD modeling of the in-cylinder flow in direct-injection diesel engines Computer & Fluids 33 995 1021 2004
- Papageorgakis, G. Assanis, D.N. “Optimizing Gaseous Fuel-Air Mixing in Direct Injection Using an RNG Based k-ε Model,” SAE Technical Paper 980135 1998
- RICOU, F.P. SPALDING, D. B. Measurements of entrainment by axisymmetrical turbulent jets JOURNAL OF FLUID MECHANICS 11 21 32 1961
- Schäpertöns, H. Thiele, F. “Three Dimensional Computations for Flowfields in DI Piston Bowls,” SAE Technical Paper 860463 1986
- Stan, C. “Direct Injection Systems - The Next Decade in Engine Technology,” SAE International Warrendale, PA 978-0-7680-3049-5 2002
- STAR-CD Methodology: Star-CD version 4.08. SI 2000 380
- Viana, E.C. Souza, F.J. Langeani, M. “Effects of Swirl Motion on Methane Homogenous Combustion in the AVL Tri-Flow System,” SAE Technical Paper 2009-36-0276 2009
- Zhao, F. Harrington, D.L. Lai, M.-C.D. “Automotive Gasoline Direct Injection Engines,” SAE International Warrendale, PA 978-0-7680-0882-1 2002