This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dynamic Response of Cam-Follower Mechanism
Technical Paper
2009-01-1416
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
One of the major applications of cam mechanism is valve actuation of Internal Combustion (IC) engines. This work deals with the follower response determination for a given prescribed cam motion for single DOF cam mechanism. Here follower response by two methods are presented first one is using Johnson's numerical method analytically obtained the dynamic response. In the second method transient dynamic analysis is carried out using FEM. Here each method is carried out considering two types of cam motions, parabolic motion and cycloidal motion. The responses of both methods are yielding good agreement.
Recommended Content
Authors
Citation
Satyanarayana, M. and Dukkipati, R., "Dynamic Response of Cam-Follower Mechanism," SAE Technical Paper 2009-01-1416, 2009, https://doi.org/10.4271/2009-01-1416.Also In
References
- Jeon H-S Parker k-J park Y-S “An Optimal Cam-Follower Design Considering Dynamic Characteristics of a Cam-Valve Systems” SEM Spring conference on experimental mechanics Portland 357 363 1998
- Demeuleanaere B. De Schutter J. “Accurate Realization of Follower Motions in High-Speed Cam-Follower Mechanisms” Proceedings of ISMA2002 II Belgium 1107 1116
- Belliveau Kenneth Daniel “An Investigation of Incipient Jump in Industrial Cam-Follower Systems” Worcester Polytechnic Institute 2002
- Kim W.J. Park Y-s Jeon H-S. “Contact Force Prediction and Experimental Verification on An OHC FInger-Follower Type Cam-Valve System” SEM Spring conference on experimental mechanics Portland 152 156 1991
- McLaughlin S. Haque I “Development of a Multi-Body Simulation Model of a Winston Cup Valve Train to Study Valve Bounce” Proc Instn Mech Engrs 216 Part K: J Multi body Dynamics 237 248 2002
- McAdams Daniel A. Tumer Irem Y. “Towards Failure Modeling in Complex Dynamic Systems: Impact of Design and Manufacturing Variations” Proceedings of DETC'02, 2002 ASME Design Engineering Technical Conferences September 29 October 2 2002 Montreal Quebec, Canada
- Pierik Ronald J. Burkhard James F. “Design and Development of a Mechanical Variable Valve Actuation System” SAE 2000 World congress Detroit, Michigan march 6-9 2000
- Seidlitz “Valve Train Dynamics- a Computer Study” 890620 , SAE 1989
- Pisano A.P. “The Analytical Development and Experimental Verification of a Predictive Model of a High-speed Cam-Follower System” Columbia University 1981
- Kushwaha M. Rahnejat H “Transient Elastohydrodynamic Lubrication of Finite Line Conjunction of Cam to Follower Concentrated Contact” Journal of Physics D: Applied Physics 2872 2890 2002
- Carlini A. Rivola A. “A Non Linear Elastodynamic Model of a Camshaft Supported By Journal Bearings” 16th AIMETA Congress of Theoretical and Applied Mechanics
- Lindholm P. Speigelberg C. Sanderson Bjorklund S. “Contact Conditions in a Cam and Roller Contact” Swedish National board for Industrial and Technical Development
- Gonzalez-Palacios Max A. Angeles Jorge “The Novel Design of a Pure Rolling Transmission to Convert Rotational into Translational Motion” Proceedings of DETC2000 ASME Design Engineering Technical Conferences September 10-14 2000 Baltimore, Maryland, USA