This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Digital Modeling to Rapid Prototyping of a Human Hand Model
Technical Paper
2003-01-2185
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes the study performed to build an accurate and reliable digital model of a human hand. A mould was manufactured using alginate contact-safe rubber and a plaster model made. The model was digitized using a contact probe system with 0.02-mm chordal tolerance, 0.2-mm stepover and 0.2 mm nominal pitch and the CAD model created. This model was used to manufacture CNC, SLA, SLS and LOM prototypes. Overall, CNC prototyping revealed, for this purpose, the adequate choice, since a lower cost and a less delivery time was obtained with this technology. The procedure developed allowed very accurate digital and prototype models of the human hand and can be applied to manufacture other type of anatomical models of the human body.
Authors
Topic
Citation
Relvas, C., Simões, J., and Gomes, M., "Digital Modeling to Rapid Prototyping of a Human Hand Model," SAE Technical Paper 2003-01-2185, 2003, https://doi.org/10.4271/2003-01-2185.Also In
References
- Simões, J. A. Lisboa, R. Pereira, A. Melo, F. Q. 1998 “Designing with SolidWorks for upper limb disabled people” SOLID Solutions 2 4 26 27
- Moes, N. 2000 “Pressure distribution and ergonomics. Shape conceptualization” International Design Conference, Design 2000 Dubrovnik May 23-26 2000
- Moes, N. Horváth, I. 2002 “Finite elements model of the human body: Geometry and non-linear material properties” Proceeding of the TMCE 2002 Wuhan, China 477 493 2002
- Fraser, T. M. 1980 “Ergonomic principles in the design of hand tools” Occupational Safety and Health Series 44 ILO Geneva, Switzerland
- Mital, A. Karwowski, W. 1991 “Workspace, equipment and tool design” Advances in Human Factors/Ergonomics 15 Elsevier Amsterdam
- Moes, N. Rusák, Z. Horváth, I. 2001 “Application of vague geometric representation for shape instance generation of the human body” Proceedings of the DETC'2001, 2001 ASME Design Engineering Technical Conferences September 9-12 Pittsburgh, Pennsylvania 2001
- Moes, N. Rusák, Z. Horváth, I. 2001 “Generation of shape instances for ergonomic optimization of shapes” International Conference on Engineering Design, ICED 2001 August 21-23 Glasgow 2001
- Moes, N. Horváth, I. 2002 “Using finite elements model of the human body for shape optimization of seats: Optimization material properties” International Design Conference, Design 2002 Dubrovnik May 14-17 2002
- Burns, C. M. Vicente, K. J. 2000 “A participant study of ergonomics in engineering design: how constraints drive design process” Appl Ergonom 31 1 73 82
- Bruseberg, A. McDonagh-Philp, D. 2002 “Focus groups to support the industrial/product designer: a review based on current literature and designer's feedback” Appl Ergonom 33 27 38
- Garmer, K. Sperling, L. Forsberg, A. 2002 “A hand-ergonomics training kit: development and evaluation of a package to support improved awareness and critical thinking” Appl Ergonom 33 39 49
- Braglia, M Petroni, Al. 1999 “A management-support technique for the selection of rapid prototyping technologies” J. of Ind Tech 15 4
- Kai, C. C. Jacob, G. G. K. Mei, T. 1997 “Interface between CAD and Rapid Prototyping systems. Part I: A study of existing interfaces” International Journal of Advanced Manufacturing Technology 13 566 570
- Jacobs, P. F. 1992 “Rapid Prototyping and Manufacturing” Society of Manufacturing Engineers
- Pham, D. T. Gault, R. S. 1998 “A comparison of rapid prototyping technologies” Int J of Machine Tools & Manufacture 38 10-11 1257 1287
- Taha, F. Wouters, K. 1998 “First French workshop on medical application of rapid prototyping techniques” Phidias 1 2-3 December 1998
- Thomas, S. W. 1992 “Optimising composite part design and manufacturing using stereolithography tooling, E-Systems” Third International Conference on Rapid Prototyping 267 279 1992
- Jacobs, P. M. 1995 “Research developments in rapid prototyping” Proc Inst Mech Engrs 209 261 266
- www.mmsonline.com/articles/109502.htm Hassold, R. “CNC machining as a rapid prototyping technique” 2000
- Lennings, A. F. 2000 “Selecting either layered manufacturing or CNC machining to build your prototype” SME RP&M 2000 2000
- www.image3.com/downloads/esua97.pdf Knox, G. Griffin, A. McMillin, S. 1997 “Pratical consideration for rapid prototyping from medical imaging data” 1997
- Ramos, A. M. Relvas, C. Simões, J. A. 2002 “The effect of milling strategies on texture, roughness and dimensional deviations of machined surfaces” J. of Mat. Proc. Tech.
- Ramos, A. M. Relvas, C. Simões, J. A. 2002 “The effect of milling strategies on texture, roughness and dimensional deviations of machined surfaces” Rapid Prototyping Journal