This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reduction of Forming Steps of an Axisymmetric Multi-step Drawing Problem via Numerical Modeling
Technical Paper
2000-01-1104
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
An automotive part formed by 10-step drawing has been simulated by finite element method aiming to reduce forming steps. The reduction of forming steps can be achieved by optimum design of tooling shapes and other process parameters per each step. The ultimate goal will be to apply the derivative based optimization scheme or any knowledge-based system to these kinds of multi-step forming problems. However, as an initial step, we determined the minimum forming steps and optimum tooling shapes using heuristic manner, insight, design rules and testing with finite element analysis incorporated with a damage model. As a result, the 10-step drawing is reduced to 6-step drawing as a practical optimum solution.
Authors
Citation
Lee, C., Cao, J., Xia, Z., and Tang, S., "Reduction of Forming Steps of an Axisymmetric Multi-step Drawing Problem via Numerical Modeling," SAE Technical Paper 2000-01-1104, 2000, https://doi.org/10.4271/2000-01-1104.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Badrinarayanan S. Zabaras N. 1996 “A sensitivity analysis for the optimal design of metal forming processes” Comput. Methods Appl. Mech. Engrg. 129 319 348
- Badrinarayanan S. Zabaras N. 1995 “Preform design in metal forming” Shen S.F. Dawson P.R. Proc. Int. Conf. on NUMIFORM'95 Balkema, Ithaca, NY 533 538
- Fourment L. Chenot J.L. 1996 “Optimal design for non-steady state metal forming process - I. Shape Optimization Method” Int. J. Numer. Methods Eng. 39 33 50
- Fourment L. Chenot J.L. 1996 “Optimal design for non-steady state metal forming process - II. application of shape optimization in forging” Int. J. Numer. Methods Eng. 39 51 65
- Zhao G. Wright E. Grandhi R.V. 1997 “Preform die shape design in metal forming using an optimization method” Int. J. Numer. Methods Eng. 40 1213 1230
- Zhao G. Wright E. Grandhi R.V. 1997 “Sensitivity analysis based preform die shape design for net-shape forming” Int. J. Mach. Tools Manufact. 37 1251 1271
- Antunez H.J. Kleiber M. 1996 “Sensitivity of forming processes to shape parameters” Comput. Methods Appl. Mech. Engrg. 137 395 409
- Joun M.S. Hwang S.M. 1998 “Die shape optimal design in three-dimensional shape metal extrusion by the finite element method” Int. J. Numer. Methods Eng. 41 311 335
- Levy S. Shinh C.F. Wilkinson J.P.D. Stine P. McWilson R.C. 1978 “Analysis of sheet metal forming to axisymmetric shapes” Niemeier B.A. Schmieder A.K. Newby J.R. Formability Topics- Metallic Materials ASTM 238 260
- Majlessi S.A. Lee D. 1988 “Development of multistage sheet metal forming analysis method” J. Mater. Shaping Technol. 6 41 54
- Guo Y.Q. Batoz J.L. Detraux J.M. Duroux P. 1990 “Finite element procedures for strain estimations of sheet metal forming parts” Int. J. Numer. Methods Eng. 30 1385 1401
- Chung K. Richmond O. 1992 “Ideal forming- II. sheet forming with optimum deformation” Int. J. Mech. Sci. 34 617 633
- Chung K. Barlat F. Brem J.C. Lege D.J. Richmond O. 1997 “Blank shape design for a planar anisotropic sheet based on ideal forming design theory and FEM analysis” Int. J. Mech. Sci. 39 105 120
- Lee C.H. Huh H. 1998 “Three dimensional multi-step inverse analysis for the optimum blank design in sheet metal forming processes” J. of Mater. Process. Technol. 80 76 82
- Lee C.H. Cao J. “Shell element formulation of multi-useful step inverse analysis for the design of axisymmetric deep drawing process” Int. J. Numer. Methods Eng.
- Eshel G. Barash M. Johnson W. 1986 “Rule Based Modeling for Planning Axisymmetrical Deep-Drawing” J. of Mechanical Working Technology 14 1 115
- Sitaraman S.K. Kinzel G.L. Altan T. 1991 “A Knowledge-based Ststem for Process-sequence Design in Axisymmetric Sheet-metal Forming” J. of Materials Processing Technology 25 247 271
- Esche S.K. Khamitkar S. Kinzel G.L. Altan T. 1996 “Process and die design for multi-step forming of round parts from sheet metal” J. of Materials Processing Technology 59 24 33
- Sevenler K. 1986 “Knowledge-based systems approach to forming sequence design for cold forging” Ohio State University Columbus, OH
- Gurson A.L. 1977 “Continuum theory of ductile rupture by void nucleation and growth: Part I - Yield criteria and flow rules for porous ductile materials” J. of Engineering Materials and Technology 99 2 15
- Tvergaard V. 1981 “Influence of voids on shear band instabilities under plane strain condition” Int. J. of Fracture Mechanics 17 389 407
- Hao S. Liu W.K. Chang C.T. 1999 “Computer implementation of damage models by finite element and meshfree methods” Comput. Metho ds Appl. Mech. Engrg.