This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Model Based Evaluation of Emissions for Manifold Injected SI Engines
Technical Paper
2000-01-0955
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
A simple model of combustion and pollutant formation has been set up. It is part of an engine simulator to be used for the study of engine control strategies.
The calculation of inlet and exhaust phases is performed by an emptying and filling method, based on the knowledge of mean inlet and exhaust conditions.
A single zone thermodynamic model has been utilized for the calculation of the combustion phase. The values of the shape factors of heat release patterns have been modeled to take into account air/fuel ratio, EGR, load and turbulence at ignition starting.
Crevice storage of unburned mixture has been considered as the dominant mechanism for unburned HC production. A model for mixing and burning of HC inside the cylinder has been proposed. NO is calculated using the three steps Zeldovich approach.
The model produces realistic calculations of combustion pressure and pollutants emission at various speed, load, ignition timing and EGR.
Authors
Topic
Citation
Diana, S., Giglio, V., Iorio, B., and Police, G., "A Model Based Evaluation of Emissions for Manifold Injected SI Engines," SAE Technical Paper 2000-01-0955, 2000, https://doi.org/10.4271/2000-01-0955.Also In
References
- Heywood J.B. “ Internal combustion engine Fundamentals ” Mc Graw Hill International 1988
- Ramos J.L. “ Internal Combustion Engine Modeling ” Hemisphere Publishing Corporation 1989
- Hendriks E. “Engine modeling for control applications: A critical survey” 1st International Conference on Control and Diagnostics in Automotive Applications October 1996 357 368 1996
- Arsie I. Pianese C. Rizzo G. “Models for the prediction of performance and emissions in a spark-ignition engine - a sequentially structured Approach” SAE paper 980779
- Hoemberg G.F. “Advanced Approach for Heat Transfer Calculation” SAE paper 790625
- Abraham J.F. Bracco V. Reitz R.D. “Comparison of computed and measured premixed charge engine combustion” Combustion and Flame 60 309 322 1985
- Heywood J.B. “Combustion and its modeling in SI engines” International Symposium Comodia 1994
- Herweg R. Maly R.R. “A fundamental model for flame kernel formation in SI engines” SAE paper 922243
- Oppenheim A.K. Kuhl A.L. “Life of fuel in engine cylinder” SAE paper 980780
- Metghalchi M. Keck J.C. “Burning velocities of air with methanol, isooctane and indolene at high pressure and temperature” Combustion and Flame 48 191 210 1982
- Lorusso J.A. Lavoie G.A. Kaiser E.W. “An Electrohydraulic Gas Sampling Valve with Application to Hydrocarbon Emission Studies” SAE Transactions 89 1980
- Wentworth J.T. “The piston crevice volume effect on exhaust hydrocarbon emissions” Combustion Science and Technology 4 97 100 1971
- Lavoie G.A. Lorusso J.A. Adamczyk A.A. “Hydrocarbon emission modeling for spark ignition engines” Combustion modeling in reciprocating engines Plenum Press New York-London 409 416 1980
- Weiss P. Keck J.K. “Fast Sampling Valve Measurement of Hydrocarbons in the Cylinder of a CFR Engine” SAE Transactions 90 1981
- Kaiser E.W. Lorusso J.A. Lavoie G.A. Adamczyk A.A. “The effect of hydrocarbon layers on the hydrocarbon emissions from spark ignition engines” Combustion Science and Technology 28 69 73 1982
- Carrier G.F. Fendell F.E. Feldman P.S. “Cyclic absorption/desorption of gas in a liquid film” Combustion Science and Technology 25 9 19 1981
- Gatellier B. “Modelisation des emissions d'hydrocarbures imbrulé des moteurs à allumage commandé” La combustion dans les moteurs d'automobile 163 234 1994
- Linna J.R. Malberg H. Bennet P.J. Palmer P.J. Tian Tian Cheng Wai K. “Contribution of Oil Layer Mechanism to the Hydrocarbon Emissions from Spark Ignition Engines” SAE paper 972892
- Lavoie G.A. Adamczyk A.A. Kaiser E.W. Cooper J.W. Rothschild W.G. “Engine HC emission modeling: partial burn effects” Combustion Science and Technology 49 99 105 1986
- Pirie A. I. “Linear Regression Analysis (Two Variables)” SAE SP-250 Statistics for the Engineer 27 34