This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Properties of Passenger Car Tires with Tread Detachment
Technical Paper
2000-01-0697
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
A series of tire property tests have been performed at CALSPAN on the flat bed tire test machine. The tires used in the testing were inflated tires with the tread removed. Identical make/model/size tires in normal (tread not removed) condition were also tested. Three passenger car tires and one truck tire were tested. The purpose of this paper is to present comparative results of the testing and data analysis. The test results objectively demonstrate substantial differences in cornering properties. Grouping all tires together, the measured cornering stiffness of a modified tire was reduced on average to 36.1 percent of the normal tire measured properties (ranging from 24.1 to 49.4 percent; standard deviation was 7.7 percent). Overall the character of the modified tire cornering stiffness plots and other modified tire properties were demonstrated to be markedly changed.
Recommended Content
Technical Paper | Force Response during Tire Tread Detachment Event |
Technical Paper | Vehicle Handling with Tire Tread Separation |
Technical Paper | Vehicle Handling with Tire Tread Separation |
Authors
Citation
Arndt, M., Thorne, M., and Dickerson, C., "Properties of Passenger Car Tires with Tread Detachment," SAE Technical Paper 2000-01-0697, 2000, https://doi.org/10.4271/2000-01-0697.Also In
References
- Wong, J.Y. Theory of Ground Vehicles John Wiley & Sons New York, NY 1978
- Milliken, William F., Milliken, Douglas L., Race Car Vehicle Dynamics Society of Automotive Engineers Warrendale, PA 1995
- Gillespie, Thomas D., Fundamentals of Vehicle Dynamics Society of Automotive Engineers Warrendale, PA 1992
- Baker Stannard J. McIlraith Decalan G. “Tire Disablements and Accidents on High-Speed Roads,” Highway Research record, Number 272, Safety and Accident Research Highway Research Board Washington, D.C. 1969
- Jacobson, “The Punctured Pneumatic Car Tire From The Users Viewpoint,” Fifth International Technical Conference on Experimental Safety Vehicles London, England June 1974
- Metz, Daniel L., “Reviewers Discussion of SAE 1999-01-0450 , ‘Handling testing of a Sport Utility Vehicle with Tire Tread Separation,’” Accident Reconstruction Technology and Animation IX, SP-1407 Society of Automotive Engineers Warrendale, PA 1999
- Treat, J.R., Tumbas, N.S., McDonald, S.T., Shinar, D., Hume, R.D., “Tri-Level Study of the Cause of traffic Accidents,” Indiana University at Bloomington Institute for Research in Public Safety, DOT-HS-805 085 March 1977
- 1993-1995 National Automotive Sampling System Crashworthiness Data Systems U.S. Department of Transportation, National Highway Traffic Safety Administration, DOT HS 808 794 October 1998
- Dickerson, Charles P. Arndt, Mark W., Arndt, Stephen M. “Vehicle Handling with Tire Tread Separation,” SAE 1999-01-0449 Society of Automotive Engineers Warrendale, PA March 1-4 1999
- Bird, K.D., Martin, J.K., “The CALSPAN Tire Research Facility: Design, Development and Initial Test Results,” SAE Paper 730582 Society of Automotive Engineers Warrendale, PA 1973
- “Laboratory Testing Machines and Procedures for Measuring the Steady State Force and Moment properties of Passenger Car Tires - SAE J1107,” SAE Information Report Society of Automotive Engineers Warrendale, PA
- Bed Tire Test Data, Engineering Dynamics Corporation January 25 1999 EDC Library Reference No. 1076 Engineering Dynamics Corporation Beaverton, OR
- Brewer, Howell K., Rice, Roy S., “Tires - Stability and Control,” SAE 830561 Society of Automotive Engineers Warrendale, PA 1983