This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Heat Transfer to the Combustion Chamber and Port Walls of IC Engines - Measurement and Prediction
Technical Paper
2000-01-0568
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
This paper summarizes the results of several investigations on in-cylinder heat transfer during high-pressure and gas exchange phases as well as heat transfer in the inlet and outlet ports for a number of different engine types (DI Diesel, SI and gaseous fueled engine). The paper contains a comparision of simulation results and experimental data derived from heat flux measurements. Numerical results were obtained from zero-, one- and three-dimensional simulation methods. Time and spatially resolved heat fluxes were measured applying the surface temperature method and special heat flux sensors. The paper also includes an assessment of different sensor types with respect to accuracy and applicability.
Recommended Content
Authors
Citation
Wimmer, A., Pivec, R., and Sams, T., "Heat Transfer to the Combustion Chamber and Port Walls of IC Engines - Measurement and Prediction," SAE Technical Paper 2000-01-0568, 2000, https://doi.org/10.4271/2000-01-0568.Also In
References
- Woschni, G. “Die Berechnung der Wandwärmeverluste und der thermischen Belastung von Dieselmotoren” MTZ 31 1970 12
- Owen, N.J. Robinson, K. Jackson, N.S. “Quality Assurance for Combustion Chamber Thermal Boundary Conditions - A Combined Experimental and Analytical Approach” SAE paper 931139
- Bargende, M. Heft 62 Technische Universität Graz 1991
- N.N. Product information Coaxial Surface Thermocouple Probes Medtherm Corporation Huntsville, Alabama 35804, USA
- Wimmer, A. Pischinger R. “Meßsystem zur Erfassung instationärer Wandwärmeströme in Verbrennungsmotoren” Motortechnische Zeitschrift MTZ 55 1994 1
- Wimmer. A. Pivec. R. Glaser. J. “Low Cost Surface Temperature Sensor” Vortrag im Rahmen der Sensor99: 9. Internationale Fachmesse mit Kongreß für Sensoren, Meßaufnehmer und Systeme Nürnberg 1999
- Wimmer, A. “Oberflächentemperaturaufnehmer zur experimentellen Bestimmung des instationären Wärmeüberganges in Verbrennungsmotoren” Technische Universität Graz 1992
- Bargende, M. “Ein Gleichungsansatz zur Berechnung der instationären Wandwärmeverluste im Hochdruckteil von Ottomotoren” Technische Hochschule Darmstadt 1991
- N.N. Product information Heat Flux Microsensor Vatell Corporation Christiansburg, VA 24073, USA
- Nußelt, W. Heft 264 Springer-Verlag Berlin 1923
- Huber, K. “Der Wärmeübergang schnellaufender, direkteinspritzender Dieselmotoren” Technische Universität München 1990
- Hohenberg, G. “Advanced Approaches for Heat Transfer Calculations” SAE paper 790825
- Kleinschmidt, W. “Zur Theorie und Berechnung der instationären Wärmeübertragung in Verbrennungsmotoren” Heft 66 Technische Universität Graz 1993
- Zapf, H. “Beitrag zur Untersuchung des Wärmeüberganges während des Ladungswechsels im Viertakt-Dieselmotor” Motortechnische Zeitschrift MTZ 30 1969 12
- Pivec, R. Sams, Th. Wimmer, A. “Wärmeübergang im Ein- und Auslaßsystem” Motortechnische Zeitschrift MTZ 59 1998 10
- Borgnakke C. Arpaci, V.S. Tabaczynski, R.J. “A Model for the Instantaneous Heat Transfer and Turbulence in a Spark Ignition Engine” SAE paper 800287
- Poulos, S. Heywood, J.B. “The Effect of Chamber Geometry on Spark-Ignition Engine Combustion” SAE paper 830334
- Morel, T. Keribar, R. “A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers” SAE paper 850204