This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Circulating Water Temperature Change on Sealing Performance of Cylinder Head Gaskets of Diesel Engines
Technical Paper
2000-01-0529
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Three types of cylinder head gaskets which were different in their structures and materials, were adopted for experimental study to describe cylinder head motions due to thermal cycle conditions. The experimental studies were conducted by measuring (1) the temperatures on the cylinder head gasket, the cylinder head, the cylinder block and head bolts,(2) the relative displacements of the cylinder head and block, (3) the axial tensions on the cylinder head bolts, and (4) the indicator diagram, on the engine testing with a specific thermal cycle.
Following conclusions were obtained as the results;
- The effect of the change in circulating water temperature on the sealing function of cylinder head gaskets has become clear through this experimental study.
- The mutual relationship between the deflection of the cylinder head and the temperature at the gasket and its peripheral region, has been able to estimate sufficiently from the results of the measurement.
Recommended Content
Technical Paper | Development of a New Metal Cylinder Head Gasket |
Technical Paper | Thermal Shock Testing Head Gaskets |
Technical Paper | Asbestos Substitution in Cylinder Head Gaskets |
Authors
Citation
Aizawa, O., Uno, T., Yakushiji, M., Wakabayashi, K. et al., "Effect of Circulating Water Temperature Change on Sealing Performance of Cylinder Head Gaskets of Diesel Engines," SAE Technical Paper 2000-01-0529, 2000, https://doi.org/10.4271/2000-01-0529.Also In
References
- Aizawa O. Yakushiji M. Uno T. Optimum Sealing Design of Cylinder Head Gasket for High Peak Pressure Diesel Engines SAE Paper 940592 1994
- Wakabayashi K. Kodama T. Uno T. An Experimental Study on Sealing Characteristics of Cylinder Head Gasket (in Japanese) Trans. of Kokushikan University, Faculty of Engineering 16 46 58 1983
- Fell Gary C. Kovarik Robert F., Jr. Test Methods for Predicting Engine Cylinder Head Gasket Performance SAE Paper 851565 1985
- Williams B. G. J. Bannard M. C. Cylinder Head Gaketing Problems in Bi-Metallic Engines SAE Paper 840189 1984
- Czernik D. E. Pearlstein R. S. Amodeo J. C. Investigation of the Cylinder Head to Crankcase Motions on a Specific Bimetal Engine SAE Paper 890272 1989
- Raub Jonathan H. Structural Analysis of Diesel Engine Cylinder Head Gasket Joints SAE Paper 921725 1992
- Kido Kazuo Hatano Kiyoshi Analysis of Cylinder Liner Distortion Due to Cylinder Head Fastening(in Japanese) Jour. of JSAE 45 8 99 105 1991
- Yanagisawa Takashi Teramoto Masahiko Optimum Design of Cylinder Head Gasket and Related Techniques SAE Paper 861376 1986
- Connelly Terrence T. Spencer Jeffrey E. Automated Control System for Thermal Shock Engine Testing SAE Paper 880141 1988
- Koch F. Maassen F Deuster U. Loeprecht M. Marckwardt H. Low Cycle Fatigue of Aluminum Cylinder Heads - Calculation and Measurement of Strain under Fired Operation SAE Paper 1999-01-0645 1999