This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Review of Parameters Affecting Stability of Partially Filled Heavy-Duty Tankers
Technical Paper
1999-01-3709
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Partially filled tanker trucks are susceptible to rollover instabilities due to fluid sloshing. Due to the catastrophic nature of accidents involving the rollover of tanker trucks, several investigations have been conducted on the parameters affecting stability of partially filled heavy-duty tankers. Since stability of heavy-duty tankers undergoing on-road maneuvers such as braking, and/or lane changing has been an issue that concerned many researchers for a long time, a literature review has been conducted which underlines the most important contributions in this field. This review covers work done in the field of fluid-structure interaction, yaw and roll stability of heavy-vehicles, and fluid-vehicle dynamic interaction. In addition, vehicle stability issues are addressed such as jack-knifing, side slipping, vehicle geometry and container geometry among others. Several mechanical models that have been proposed to simulate the fluid sloshing motion effects are also covered in this review as well as experimental work done in this field.
Approaches to assess the stability of tanker trucks vary significantly based on the assumptions made on the above mentioned issues. However, for partially filled tanker-trucks, the approaches available for stability assessment have yet to be generalized in order to include various maneuvers, vehicle and road configurations.
Recommended Content
Technical Paper | A Finite Element Modeling Approach for Stability Analysis of Partially Filled Tanker Trucks |
Ground Vehicle Standard | Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge |
Technical Paper | On the Directionality of Rollover Damage and Abrasions |
Authors
- Mohamed I. Salem - Dept. of Mech. and Aerospace Engrg. AND College of Engrg. and Mineral Resources,West Virginia Univ.
- Victor H. Mucino - Dept. of Mech. and Aerospace Engrg. AND College of Engrg. and Mineral Resources,West Virginia Univ.
- Mridul Gautam - Dept. of Mech. and Aerospace Engrg. AND College of Engrg. and Mineral Resources,West Virginia Univ.
- Matthew Aquaro - Dept. of Mech. and Aerospace Engrg. AND College of Engrg. and Mineral Resources,West Virginia Univ.
Citation
Salem, M., Mucino, V., Gautam, M., and Aquaro, M., "Review of Parameters Affecting Stability of Partially Filled Heavy-Duty Tankers," SAE Technical Paper 1999-01-3709, 1999, https://doi.org/10.4271/1999-01-3709.Also In
References
- Abramson, H. N. Chu, W. Ransleben, G. E. Jr. “Representation of Fuel Sloshing in Cylindrical Tanks by an Equivalent Mechanical Model,” Technical Report No. 8 Southwest Research Institute June 30 1960
- Abramson, H. N. Chu, W. H. Kana, D. D. “Some Studies of Nonlinear Lateral Sloshing in Rigid Containers,” Journal of Applied Mechanics December 1966
- Abramson, H. N. “The Dynamic Behavior of Liquids in Moving Containers,” NASA SP-106 1966
- Allen, R. W. et al “Field Testing and computer Simulation Analysis of Ground Vehicle Dynamic Stability,” SAE Paper No. 900127 1990
- Anderson, G. W. “Sloshing Parameters for Cylindrical Tanks,” Douglas Aircraft Co. Santa Monica Div. August 26 1960
- Aquaro, M. -Stability of Partially Filled Tanker Trucks Using a Finite Element Modeling Approach,” West Virginia University April 1999
- Aurell, J. Edlund, S. “The Influence of Steered Axles on the Dynamic Stability of Heavy Vehicles,” SAE No. 892498 1989
- Bauer, H. F. “The Moment of Inertia of A Liquid in a Circular Cylindrical Tank,” Army Ballistic Missile Agency April 1958
- Bauer, H. F. “Fluid Oscillations in a Cylindrical Tank,” Army Ballistic Missile Agency, Report DA-TR-4-58 1958
- Bauer, H. F. “Fluid Oscillations in a Cylindrical Tank with Damping,” Army Ballistic Missile Agency, Report DA-TR-4-58 1958
- Bauer, H. F. “On the Destabilizing Effects of Liquids in Various Vehicles,” Vehicle System Dynamics 1 1972 227 260 1972
- Bauer, H. F. “Dynamic Behavior of an Elastic Separating Wall in Vehicle Containers,” Journal of Vehicle Design 2 1 1981
- Bechtold, J. C. “Vehicle Stability and 102, Modern Bulk Transporter,” 65 69 September 1983
- Bidwell, J. B. “State-of-the-Art- Vehicle Control and Road Holding,” SAE Paper No. 700366 1970
- Billing, J. R. et al. “Test of a B-Train Converter Dolly,” Ontario Ministry of Transportation No. TVS-CV=82=111 May 1983
- Bohn, P. F. Butler, M., C. Dunkle, H., D. Eshleman, R., L. “Computer Simulation of the Effect of Cargo Shifting on Articulated Vehicles Performing Braking and Cornering Maneuvers,” 2 Technical Report The John Hopkins University May 1981
- Botkin, L. A. “Safe Highway Transportation of Bulck Liquids,” SAE paper No., 700872 1970
- Brien, O. O. “Information on the Model 60PRS Water Distributor,” E.D. ENTYRE & CO. January 23 1998
- Budiansky, B. “Sloshing of Liquids in Circular Canals and Spherical Tanks” Journal of the Aero/Space Sciences 27 3 161 173 March 1960
- Culley, C. Anderson, R. L. “Effect of Cargo Shifting on Vehicle Handling,” Dynamic Science Inc. March 1978
- Dahlberg, E. Vàgstedt, N. “The Advantages of a Simple Approach Modeling Heavy Vehicle Handling,” SAE Paper No. 973264 1997
- Das, N. S. Suresh, B. A. Wambold, J., C. “Estimation of Dynamic Rollover Threshold of Commercial Vehicles Using Low Speed Experimental Data,” SAE Paper No. 932949 1993
- Dill, P. A. “Static Roll Model User's Manual,” University of Michigan Transportation Research Institute Ann Arbor, MI, December 1985
- El-Gindy, M. Hosamel-deen, Y. H. “Sensitivity Parametric Analysis of UMTRI Static Roll Mode,” International Journal of Vehicle Design 10 2 1989
- El-Gindy, M. “An Overview of Performance Measurements for Heavy Comeercial Vehicles in North America,” International Journal of Vehicle Design 16 4/5 441 463 1995
- Ellis, J. R. “The Dynamics of Vehicles During Braking,” Symposium on Control of Vehicles During Braking and Cornering, Proceedings London 1963
- Ellis, J. R. “The Ride and Handling of Semi-Trailer Articulated Vehicles,” Automobile Engineer 56 523 529 1966
- Ervin, R. D. MacAdam, C. C. Fancher, P. S. “The Longitudinal Traction Characteristics of Truck Tires as Measured on Dry Pavements,” Highway Safety Research Institute, University of Michigan February 1975
- Ervin, R. D. Wild, R. E. “The Noise and Traction Characteristics of Bias-Ply Truck Tires,” Highway Safety Research Institute, University of Michigan January 1976
- Ervin, R. D. Winkler, C. B. Bernard, J. E. Gupta, R. K. “Effects of Tire Properties on Truck and Bus Handling,” Highway Safety Research Institute, University of Michigan December 1976
- Ervin, R. D. et al. “Ad Hoc Study of Certain Safety-Related Aspects of Double-Bottom Tanker,” Final Report prepared for Office of Highway Safety Planning, Michigan Department of State Police Highway Safety Research Institute, University of Michigan May 7 1978
- Ervin, R. D. Nisonger, R. L. Mallikarjunarao, C. Gillespie, T. D. “The Yaw Stability of Tractor-Semi-trailers During Cornering,” Highway Safety Research Institute, University of Michigan June 1979
- Ervin, R. D. Nisonger, R. L. Sayers, M. Gillespie T. D. Fancher, P. S. “Influence of Size and Weight Variables on the Stability and Control Properties of Heavy Trucks,” March 1983
- Ervin, R. D. “The Influence of the Size and Weight Variables on the Roll Stability of Heavy Duty Trucks,” SAE Paper No. 831163 1983
- Ervin, R. D. Guy, Y. “The influence of Weight and Dimensions on the Stability and Control of Heavy Duty Trucks in Canada,” University of Michigan Transportation Research Institute June 1986
- Esmailzadeh, E. et al “Road Vehicle Dynamics of Log Hauling Combination Trucks,” SAE Transactions Journal of Commercial Vehicles 100 453 467 1991
- Esmailzadeh, E. “Directional Performance and Yaw Stability of Articulated Combination Trucks,” SAE paper No. 962154 1996
- Fancher, P. et al. “Test Procedure for Studying Vehicle Dynamics in Lane-Change Maneuvers,” SAE Paper No. 760351 1976
- Fancher, P. S. Ervin, R., D. MacAdam, C., C. Winkler, C., B. “Measurement and Representation of the Mechanical Properties of Truck Leaf Springs,” SAE paper No. 800905 1980
- Fancher, P. S. et al. Factbook of the Mechanical Properties of the Components for Single-Unit and Articulated Heavy Trucks Michigan University Ann Arbor, MI December 1986
- Fancher, P. S. Mathew, A. Vehicle Dynamics Handbook Single-Unit and Articulated Heavy Trucks University of Michigan Transportation Research Institute Ann Arbor, MI May 1987
- Gautam, M. Mucino, V. Salem, M. Saunders, E. Aquaro, M. “Automotive Stability of Heavy-Duty Truck Tractor-Tanker Combination,” Fredrick Manufacturing March 1999
- George, R., M. “Behavior of Articulated Vehicles on Curves,” Heavy Vehicles and Roads: Technology, Safety and Policy 1992
- Gillespie, T., D. MacAdam C. C. “Constant Velocity Yaw/Roll Program,” The University of Michigan Transportation Research Institute 1982
- Graham, E. W. Rodriguez, A. M. “The Characteristics of Fuel Motion which Affect Airplane Dynamics,” Journal of Applied Mechanics 19 381 388 September 1952
- Hales, F. D. “The Rigid Body Dynamics of Road Vehicle Trains,” The Dynamics of Vehicles on Roads and Tracks Proceedings of IUTAM Symposium Delft August 1975
- Hazemoto, T. “Analysis of Lateral Stability for Doubles,” 730688 June 1973
- Hinch, J. Shadle, S. Kelin, T. M. NHTSA's Rollover Rulemaking Program-Results of Testing and Analysis,” SAE paper No. 920581 1992
- Jansen, S. Lupker, H. “Fuel Truck Rollover Simulation,” Proceedings of the International Technical Conference on the Enhanced Safety of Vehicles Munich 1994
- Jindra, F. “Handling Characteristics of Tractor-Trailer Combinations,” SAE paper No. 650720 1965
- Karamihas, S. M. Winkler, C. B. “Ride Performance of Heavy-Vehicle Suspensions: Data Tables,” SAE paper No. 973208 1997
- Komatsu, K. “Non-linear Sloshing Analysis of Liquid in Tanks with Arbitrary Geometries,” International Journal of Non-Linear Mechanics 22 193 207 1987
- Kortüm, W. et al. “Multibody Computer Codes in Vehicle System Dynamics,” Lisse, Swetz and Zeitlinger 1993
- Krauter, A. I. Wilson, R. K. “Simulation of Tractor-semitrailer Handling” SAE paper No. 720922 1972
- Lamb, M. Hydrodynamics Dover Publications N.Y. 1945
- Lieh, J. “A Multibody Dynamics Program for Truck Simulation,” SAE paper No. 942303 1994
- Liu, P. J. Rakheja, S. Ahmed, A., K., W. “Dynamic Rollover Threshold of Articulated Fright Vehicles,” Heavy Vehicle Systems International Journal of Vehicle Design Aug 1997
- Lund, Y. I. Bernard, J., E. “Analysis of Simple Rollover Matrices” SAE paper No. 950306 1995
- Mallikarjunarao, C. “Road Tanker Design: its Influence on the Risk and Economic Aspects of Transporting Gasoline in Michigan,” University of Michigan 1982
- Mallikarjunarao, C. Ervin, R. D. Segel, L. “Roll Response of Articulated Motor Trucks during Steady-Turning Maneuver.” ASME, Winter Annual Meeting November 1982
- McCarty, J. L. Stephens, D. G. “Investigation of Natural Frequencies of Fluids in Spherical and Cylindrical Tanks,” 1960
- Mikulcik, E. C. “The Dynamics of Tractor-Semitrailer Vehicles: The Jackknifing Problem,” SAE paper No. 710045 1971
- Murnane, T. J. “Vehicle Accidents Statistics Producing Rollover and Spills Involving Tank Semi-Trailers,” SAE Truck and Bus Meeting Charlotte, NC November 1989
- Nalecz, A. G. Genin, J. “Dynamic Stability of Heavy Articulated Vehicles,” International Journal of Vehicle Design 5 4 1984
- Nalecz, A. G. “Intermediate Maneuver Induced Vehicle Rollover Simulation,” 1988
- Nalecz, A. G. et al. “Development and Analysis of Intermediate Tripped Vehicle Rollover Simulation,” ITRS Final Report 1989
- Popov, G. Vatistas, G. H. Sankar, S. Sankar, T. S. “Influence of Liquid Load Shift on the Dynamic Response of Articulated Tank Vehicles,” Vehicle System Dynamics 19 4 1990
- Popov, G. “Dynamics of Liquid Sloshing in Road Containers,” Concordia University Montreal, Canada 1991
- Popov, G. Sankar, S. Sankar, T., S. Vatistas, G. H. “Liquid Sloshing in Rectangular Road Containers,” Computer and Fluids 21 551 569 1992
- Popov, G. Sankar, S. Sankar, T. S. Vatistas, G. H. “Dynamics of Liquid Sloshing in Horizontal Cylindrical Road Containers,” Proc. Inst. Of Mechanical Engineers ImechE 207 Journal of Mechanical Engineering Science 399 406 1993
- Popov, G. Sankar, S. Sankar, T. S. “Dynamics of Liquid Sloshing in Baffled and Compartmented Road Containers,” Journal of Fluids and Structures 7 803 821 1993
- Popov., G. Sankar, S. Sankar, T. S. “Optimal Shape of a Rectangular Road Container,” Journal of Fluid and Structures 7 75 86 1993
- Popov, G. Sankar, S. Sankar, T. S. “Shape Optimization of Elliptical Road Containers Due to Liquid Load in Steady-State Turning,” Vehicle System Dynamics 25 203 221 1996
- Pflug, H. C. “Lateral Dynamic Behavior of TruckTrailer Combinations due to the Influence of the Load,” Vehicle System Dynamics 15 155 175 1986
- Rakheja, S. Sankar, S. Ranganathan, R. “Roll Plane Analysis of Articulated Tank Vehicles During Steady Turning,” Vehicle System Dynamics 17 1-2 81 104 1988
- Rakheja, S. Sankar, S. Ranganathan, R. “Influence of Truck Design Factors on the Rollover Thresh- old of Partially Filled Tank Vehicles,” SAE paper No. 892480 1989
- Rakheja, S. Sankar, S. “Field Testing of a Tank Truck and Study of Fluid Slosh,” SAE paper No. 912679 1991
- Rakheja, S. Ranganathan, R. Sankar, S. “Field Testing and Validation of Directional Dynamics Model of a Tank Truck,” International Journal of Vehicle Design 13 3 1992
- Rakheja, S. Ranganathan, R. “Estimation of the Rollover Threshold of Heavy Vehicles Carrying Liquid Cargo: a Simplified Approach,” Heavy Vehicles Systems, International Journal of Vehicle Design 1 1 1993
- Rakheja, S. Vallurupalli, R. K. Woodrooffe, J. “Influence of Articulation Damping of the Yaw and Lateral Dynamic Response of the Vehicle,” Heavy Vehicle Systems, International Journal of Vehicle Design 2 2 1995
- Ranganathan, R. Rakheja, S. Sankar, S. “Kineto-Static Roll Plane Analysis of Articulated Tank Vehicles with Arbitrary Tank Geometry,” International Journal of Vehicle Design 10 1 1989
- Ranganathan, R. “Stability Analysis and Directional Response Characteristics of Heavy Vehicles Carrying Liquid Cargo,” Concordia University Montreal, Canada 1990
- Ranganathan, R. Rakheja, S. Sankar, S. “Influence of Liquid Load Shift on the Dynamic Response of Articulated Tank Vehicles,” Vehicle System Dynamics 19 177 200 1990
- Ranganathan, R. Ying, Y. Miles J. B. “Analysis of Fluid Slosh in Partially filled Tanks and Their Impact on the Directional Response of Tank Vehicles,” SAE paper 932942 1993
- Ranganathan, R. Rakheja, S. Sankar, S. “Directional Response of a B-Train Vehicle Combination Carrying Liquid Cargo,” Journal of Dynamic Systems, Measurement, and Control 115 133 139 1993
- Ranganathan, R. Ying, Y. Miles J. B. “Development of a Mechanical Analogy Model to Predict the Dynamic Behavior of Liquids in Partially Filled Tank Vehicles” SAE paper 942307 1994
- Ranganathan, R. Aia, A. “Development of Heavy Vehicle Dynamic Stability Analysis Model Using MATLAB/SIMULINK,” SAE paper No. 952638 1995
- Rattayya, Jasti V. “Sloshing of Liquids in Axisymmetric Ellipsoidal Tanks,” AIAA paper No. 65-114, 2 nd Aerospace Science Meeting Jan. 1965
- Rayleigh, Lord “On Waves. Phil. Mag.,” 1 4 257 279 1876
- Ruhl, R. L. Ruhl, R. A. “Prediction of Steady State Roll Threshold for Loaded Flat Bed Trailers-Theory and Calculation,” SAE Paper No. 973261 1997
- Sankar, S. Rakheja, S. Ranganathan, R. “Directional Response of Partially Filled Tank Vehicles,” SAE paper No. 892481 1989
- Sankar, S. Rakheja, S. “Liquid Tanker Stability,” Transport Canada, Transportation Development Center Report No. TP 10690 E. November 1990
- Sankar, S. Sankar, T. S. Popov, G. “Dynamic of Liquid Sloshing in Elliptical Road Containers,” CSME 1992
- Sankar, S. Ranganathan, R. Rakheja, S. “Impact of Dynamic Fluid Slosh Loads on the Directional Response of Tank Vehicles,” Vehicle System Dynamics 21 385 404 1992
- Sankar, S. Surial, S. “A Sensitivity Analysis Approach for Fast Estimation of Rollover Stability of Heavy Articulated Vehicle During Steady State Turning,” Concave Research Center, Concordia University Montreal, Canada 1994
- Sayers, M. W. Riley, S. M. “Modeling Assumptions for Realistic Multibody Simulations of the Yaw and Roll Behavior of Heavy Trucks,” SAE paper No. 960173 1996
- Schallamach, A. Turner, D. M. “The wear of Slipping Wheels,” Wear 3 1 25 1960
- Schmid, I. “Engineering Approach to Truck and Tractor Train Stability” SAE paper No. 670006 1967
- Shimizu, T. Hayama, S. “Nonlinear Responses of Sloshing Based on Shallow Water Wave Theory,” JSME International Journal 30 551 569 1987
- Sliber, A. Paslay, P. R. “The Forced Lateral Oscilations of Trailers,” ASME Journal of Applied Mechanics 24 516 519 1957
- Sliber, A. Troger, H. “The Steady State Behaviour of Tank Trailer System Carrying Rigid or Liquid Cargo,” VSD-IUTAM Symposium on Dynamics of Vehicles on Roads and Tracks Vienna 1977
- Strandberg, L. Nordstorm, O. Nordmark, S. “Safety Problems in Commercial Vehicles Handling,” Proceedings, Symposium on Commercial Vehicles Braking and Handling Highway Safety Research Institute, University of Michigan 1975
- Stribersky, A. Fancher, P. S. “The Nonlinear Behavior of Heavy-Duty Truck Combinations with Respect to Straight-line Stability,” Journal of Dynamic Systems, Measurement, and Control 111 577 582 1989
- Tabarrok, B. Tong, X. “Directional Stability Analysis of Logging Trucks by a Yaw Roll Model,” SAE paper No. 932946 1993
- Tabarrok, B. Tong, X. “A Computer Simulation Analysis of Road Dynamics of Log Hauling Trucks,” SAE paper No. 942305 1994
- Tamny, S. “Operating Vehicle Roll Stability,” SAE paper No. 932945 1993
- Tong, X. Tabarrok, B. El-Gindy, M. “Computer-Based Analysis of the Dynamics Performance of Log Hauling Trucks,” SAE 952637 1995
- Troger, H. Zeman, K. “A nonlinear Analysis of the Generic Types of Loss of Stability of the Steady State Motion of a Tractor-Semitrailer,” Vehicle System Dynamics 13 161 172 1984
- Vagstedt, N. Dahlberg, E. “Determination of Lateral Axle Data of Heavy Vehicles Combinations,” SAE paper No. 973188 1997
- Verma, M. K. et al. “Roll Dynamics of Commercial Vehicles,” Vehicle System Dynamics 9 1 17 1980
- Warner, R. W. Caldwell, J. T. “Experimental Evaluation of Analytical Models for the Inertias and Natural Frequencies of Fuel Sloshing in Circular Cylindrical Tanks,” National Aeronautics and Space Administration May 1961
- Weir, D. H. et. al. “Analysis of Truck and Bus handling,” Systems Technology Inc. June 1974
- Williams, D. The Mathematical Theory of the Snaking of Two-Wheeled Trailers,“ Proceedings of the Institute of Mechanical Engineers Automobile Division 175 187 1952
- Winkler, C., B. et al “Development of Test Procedure for Minimum Safety Performance Standards,” University of Michigan Transportation Research Institute August 1990
- Winkler, C., B. Karamihas, S. M. Bogard, S. E. “Roll-Stability Performance of Heavy-Vehicles Suspensions,” SAE paper No. 922426 1992
- Winkler, C. B. et al. “Repeatability of the Tilt-Table Test Method,” SAE Paper No. 930832 1993
- Wolkowicz, M. “On-the-Scene Study of Commercial Vehicles,” Proceedings of International Symposium on Heavy Vehicle Weights and Dimensions Kelowna, BC, Canada 171 186 June 8-13 1986
- Wong, J. Y. Theory of Ground Vehicles 2nd John Wiley & Sons, Inc. 0-471-52496-4 1993
- Yang, X. S. “Directional Response Characteristics of Liquid Tank Vehicles Subjected to Dynamic Liquid Load Shift,” M. S. Thesis University of Missouri Columbia December 1992
- Zeman, K. Troger, H. Scheidl, R. “Bifurcation Theory and Vehicle Dynamics-with Application to the Tractor-Semitrailer,” Wickens, A., H. Proceedings of the 7 th IAVSD-Symposium Cambridge, U., K. 1981 Swets and Zeitlinger B., V. 1982
- Zhanqi, W. Rakheja, S. “Influence of Partition Location on the Braking Performance of a Partially-Filled Tank Truck,” SAE paper No., 952639 1995