This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Flame Propagation Characteristics by Planar OH* Measurement
Technical Paper
1999-01-3326
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The purpose of this study is to reveal the flame propagation characteristics. Planar OH* image and local radical emission were measured simultaneously. Planar OH* images were used to analyze the flame propagation characteristics by high-speed camera. These images were then used to evaluate the speed of distribution and the direction of flame propagation. By comparing local point radical emission and planar OH*, the flame propagation characteristics was measured and evaluate that. And the time history of the radical intensity and planar OH* distribution were compared. The relation ship between flame propagation speed and initial heat generation was discussed. The variation of flame propagation speed and the difference of propagation speed in both port sides were confirmed.
Recommended Content
Topic
Citation
Ikeda, Y., Nakajima, T., and Ohira, T., "Flame Propagation Characteristics by Planar OH* Measurement," SAE Technical Paper 1999-01-3326, 1999, https://doi.org/10.4271/1999-01-3326.Also In
References
- Zhao, F. Q. Taketomi, M. Nishida, K. Hiroyasu, H. “PLIF Measurement of the Cyclic Variation of Mixture Concentration in a SI Engine” SAE Paper No. 940988 1994
- Fujikawa, T. Hattori, Y. Akihama, K. “Quantitative 2-D Fuel Distribution Measurement in a SI Engine Using Laser-Induced Fluorescence with Suitable Combustion of Fluorescence Tracer and Excitation Wavelength” SAE Paper No. 972944 1997
- Akihama, K. et al. “NO and OH distribution measurement in a spark ignition engine by KrF excimer laser-induced fluorescence -Relationship between NO, OH and fuel distribution at spark timing-” The 14th Internal Combustion Engine Symposium Japan 1997
- Schulz C. et al. “Quantitative 2D Single-Shot Imaging of NO Concentrations and Temperatures in a Transparent SI Engine” 26th Symposium (International) on Combustion 1996
- BÄUERLE B. et al. “Time-Resolved Investigation of Hot Spot in the End Gas of an S.I. Engine by Means of 2-D Double-Pulse LIF of Formaldehyde” 26th Symposium (International) on Combustion 1996
- Urushihara T. et al. “LIF Visualization of In-cylinder Fuel Mixture Formation in a Direct injection SI Engine” The 14th Internal Combustion Engine Symposium Japan 1997
- DRAKE M. C. et al. “Advanced Diagnostics for Minimizing Hydrocarbon Emissions from a Direct-injection Gasoline Engine” 26th Symposium (International) on Combustion 1996
- Nguyen Q. Paul P. H. “The Time Evolution of a Vortex-Flame Interaction Observed via Planar Imaging of CH and OH” 26th Symposium (International) on Combustion 1996
- Hacohen J. et al. “Experimental and Theoretical Analysis of Flame Development and Misfire Phenomena in a Spark-Ignition Engine” SAE Paper No. 920415 1992
- Yoshiyama S. et al. “Fractal Characteristics of Turbulent Premixed Flame in a Closed Vessel and a Spark-Ignition Engine” Proceeding of COMODIA 98 1998
- Higelin P. et al. “Flame Propagation in an SI Engine with a Non-Conventional Igniter” Proceeding of COMODIA 98 1998
- Corcione Felice E. et al. “Spectral Extinction Measurements of Spray Combustion in a Divided-Chamber Diesel Engine System” 26th Symposium (International) on Combustion 1996
- Blair, G. P. “The Basic Design of Two-stroke Engine SAE Publication R-104 1990
- Wakabayashi S. et al. “Development of a Multi-Color Light Collection Probe with High Spatial Resolution” JSME Transactions 64 619B 1997
- Nakai H. et al. “Flame Propagation Variation due to Insufficient HC Concentration” SAE Paper No. 982565 1998
- Ikeda Y. et al. “Local Chemiluminescence Measurement for Flame Propagation Analysis” Proceeding of COMODIA 98 1998
- Nakai H. et al. “Cyclic Variation in HC Concentration near the Spark Plug in a Two-stroke Engine” Proceeding of SETC 1997
- Ikeda Y. et al. “Time-series Analysis of Velocity and Pressure in Two-stroke Engine” 1997
- Peckham M. Collings N. “In-Cylinder HC Measurements with a Piston-Mounted FID” SAE Paper 932643 1993
- Crawford J. G. Wallace J. S. “Validation Tests for a Fast Response Flame Ionisation Detector for In-Cylinder Sampling Near the Spark Plug” SAE