This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Accuracy Determination of Sheet Metal Forming Simulation Using One-Step Code
Technical Paper
1999-01-3166
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The use of numerical simulation in the design of stamped components has become common industrial practice.
Inverse one-step codes are among the fastest to provide answers but, unlike incremental codes, they need an additional verification phase.
Given this context, IVECO has conducted experimental testing work on the plastic deformations measured on two industrial components obtained by means of sheet steel stamping.
The two components, one with structural functions (sliding door upper reinforcement) and the other one with esthetic functions (rear left door skin), have been selected as representative of the various feasibility and process issues connected with sheet metal drawing.
Recommended Content
Authors
Citation
Saggese, L., Revellino, M., and De Muro, T., "Accuracy Determination of Sheet Metal Forming Simulation Using One-Step Code," SAE Technical Paper 1999-01-3166, 1999, https://doi.org/10.4271/1999-01-3166.Also In
References
- Scaltriti G. Saggese L. c/o IVECO S.p.A. Studio numerico e sperimentale dell’imbutitura in lamiera sottile per veicoli industriali Tesi di Laurea Politecnico Università di Torino 1997-98
- IVECO Standard 15-2806 Lamiere e nastri di acciaio non legato, laminati a freddo per imbutitura e piegamento a freddo 3 4 97
- Sebastiani C. Rizzo L. c/o Centro Sviluppo Materiali S.p.A. Ottimizzazione sperimentale del test per la determinazione della Curva Limite di formabilità per acciai da stampaggio a freddo Tesi di laurea Università degli studi di Roma La Sapienza 1997-98
- Garro A. Grimaldi S. Appunti sullla deformazione della lamiera FIAT Auto S.p.A. (Marzo ’79)
- IVECO Standard 15-0113 Materiali metallici Prova di resistenza a trazione 6 3 89
- A.S.A.M.E. Reference manual version 4.0 CAMSYS Inc. 1998
- Batoz J.L Guo Y.Q Detraux J.M Duroux P Finite Element Procedure for Strain estimation of Sheet metal Forming Intl. J. Numer. Meth. Eng. 30 1990
- FIAT AUTO Normazione N 05211, Verifica di imbutibilità componenti in lamiera mediante analisi inversa sett 1996
- HILL R. The Mathematical Theory of Plasticity Oxford University Press 1950 317 340
- Hosford W. F. Cadell R.M. Metal Forming Mechanics and Metallurgy 2 Prentice Hall N.J.07632
- Brozzo Pietro Prof. Ing. Centro Sperimentale Metallurgico Struttura e proprietà meccaniche dei materiali metallici 1979