This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hot Rolled Steel Bar Low Cycle, Strain Controlled Fatigue Data for Automotive Applications
Technical Paper
1999-01-0599
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The automotive industry has developed techniques for assessing the service life of steel components through a combination of finite element analysis and strain controlled fatigue data. These techniques require knowledge of the cyclic properties of various steel grades for which the processing, structure and mechanical properties have been characterized. This paper describes the development, under the auspices of the American Iron and Steel Institute, of a strain controlled fatigue database for steel bar products used in chassis and power train applications. The format of the database is described, and the use of cyclic properties to predict component life is discussed.
Recommended Content
| Technical Paper | Low Cost Durability Virtual Verification Methodology |
| Technical Paper | CAE Used for Durability Analysis - A Case Study |
| Technical Paper | Durability of Welding Beads for Chassis Parts |
Authors
Citation
Oakwood, T. and Conle, F., "Hot Rolled Steel Bar Low Cycle, Strain Controlled Fatigue Data for Automotive Applications," SAE Technical Paper 1999-01-0599, 1999, https://doi.org/10.4271/1999-01-0599.Also In
References
- Topper, T.H. Gowda, C.V.B. “Local Stress-Strain Approach to Fatigue Analysis and Design” Technical Digest 70-DE-24 ASME 1970 ASME Des. Eng. Conf. & Show Chicago, IL May 1970
- Landgraf, R.W. Morrow, J. Endo, T. “Determination of the Cyclic Stress-Strain Curve” ASTM J. of Matls. 4 1 March 1969 176 188
- “Standard Practice for Strain-Controlled Fatigue Testing” ASTM Standards 3.01 ASTM 1995 525 539
- Coffin, L.F. “A Study of the Effects of Cyclic Thermal Stresses on a Ductile Material ASME Trans. Aug. 1954 931 950
- Manson, S.S. “Discussion” Trans. of ASME Jour. of Basic Engineering Dec. 1962 537 541
- “Fatigue Design Handbook” SAE AE-10 1988
- Dowling, N.E. “Mechanical Behavior of Materials,” Prentice-Hall 0.13-579046-8 1993
- Roessle, M.L. Fatemi, A. Khossrovaneh, A.K. “Variation in Cyclic Deformation and Strain-Controlled Fatigue Properties Using Different Curve Fitting and Measurement Techniques” SAE Paper 99M-157
- Basquin, O.H. “The Exponential Law of Endurance Test,” ASTM Proc. 10 1919 625 630
- Neuber, H. “Theory of Stress Concentration for Shear Strained Primatical Bodies with Arbitrary Non-Linear Stress-Strain Law” Jour. of Appl. Mech. Dec. 1961 544 550
- Topper, T.H. Wetzel, R.M. Morrow, J. “Neubers Rule Applied to Fatigue of Notched Specimens” ASTM Jour. of Matl. Sci. 4 1 March 1969 200 209
- Tipton, S. “A Review of the Development and Use of Nueber's Rule for Fatigue Analysis’ SAE Paper 910165 1991
- Smith, K.N. Watson P. Topper, T.H. “A Stress-Strain Function for the Fatigue of Metals” ASTM Jour. of Mtls. 5 1 Dec. 1970 767 778
- Morrow, J. Fatigue Design Handbook SAE 1968
- Watson, P. “The Effect of Mean Stress and Overstrains on the Fatigue Behaviour of Structural Components” Unv. Of Waterloo Walerloo, Ont., Canada 1971
- Chu, C.-C. “Critical Plane Fatigue Analysis of Various Constant Amplitude Tests for SAE 1045 Steels” SAE Paper 940246 1994
- Pilkey, W.D. “Peterson's Stress Concentration Factors’ J. Wily & Sons 0-471-538493-3 1997
- Thompson, J.C. Xu, R. “A New Technique of Extracting Stress Concentration Information from a Limited Set of Test Data” Int. Conf. on Press. Vessel Techn. ASME 2 1996 245 254
- Bonnen, J.J. F. Conle, F.A. Chu, C.-C. “Biaxial Torsion Bending Fatigue of SAE Axle Shafts” SAE Paper 910164 1991
- Conle, F.A. Landgraf, R.W. “A Fatigue Analysis Program for ground Vehicle Components” Proc. Of SEECO '83, Int. Conf. On Digital Techniques in Fatigue Soc. Env. Engrs. London 1983 1 28
- Landgraf, R.W. Richman, R.H. “Fatigue Behavior of Carburized Steel” ASTM STP 569 1975 130 144
- Chu, C.-C. “Programming of a Multiaxial Stress-Strain Model for Fatigue Analysis” SAE Paper 920662 1992
- Nowack, H.D. Hanschmann, D. Ott, W. Trautmann, K.-H. Maldfeld, E. “Crack Initiation Life Behavior Under Biaxial Loading Conditions: Experimental Behavior and Prediction” ASTM STP 1280 1997 159 183
- Bannentine, J.A. Socie, D.F. “A multiaxial Fatigue Life Estimation Technique” ASTM STP 1122 1992 249 275
- “Multiaxial Fatigue: Analysis and Experiment” Cordes, T. Tipton, S. SAE